Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

- Software Tuning (https://www.ft86club.com/forums/forumdisplay.php?f=88)

- - Need Help OFT ERROR CODE (https://www.ft86club.com/forums/showthread.php?t=142109)

Need Help OFT ERROR CODE

Hey so I already had a tune installed for a while but was trying to change tunes. During installing the new tune it erased my ecu file like normal but then failed , So now I I have no ecu tune at all and can’t start my car. I’ve tried installing the same tune I was on and each time I do I get an error code 10010. I can’t even go back to the original file. I’ve been trying for the past 3 hours. And I’m in a parking garage where my car can get towed so I can’t leave my car.

This is the error

An error accused while writing the ECU. Check Cable connections, ignition switch positions, then try again later. OFTCODE: 10010

I’ve tried disconnecting the battery
Installing new tune files
Making sure all windows are up and doors closed
Checked cable connections

Quote:

Originally Posted by BayArea_FRS (Post 3362550)

make sure barry volts above avout 12 v

also try writing the stock ie original tune file to car

Quote:

Originally Posted by BayArea_FRS (Post 3362550)

Hey so I already had a tune installed for a while but was trying to change tunes. During installing the new tune it erased my ecu file like normal but then failed , So now I I have no ecu tune at all and can’t start my car. I’ve tried installing the same tune I was on and each time I do I get an error code 10010. I can’t even go back to the original file. I’ve been trying for the past 3 hours. And I’m in a parking garage where my car can get towed so I can’t leave my car.

This is the error

An error accused while writing the ECU. Check Cable connections, ignition switch positions, then try again later. OFTCODE: 10010

I’ve tried disconnecting the battery

Installing new tune files

Making sure all windows are up and doors closed

Checked cable connections

The power doesn't come on at all? Unfortunately you might've bricked your ECU. In the meantime you can try and keep paying your parking another day so you can get help with it. You're battery might've died in the process. Try getting a new on and doing it again.

Sent from my GM1915 using Tapatalk

The battery comes on

Quote:

Originally Posted by BayArea_FRS (Post 3363137)

The battery comes on

When you turn your car to the "on" position , 2 clicks on push to start/key position 2, do you hear the fuel pump energize? Also do you have the latest updates on the open flash tablet? You might have bricked your ecu if you powered off the car after the failed flash instead of trying to reflash the car again after failure.

Quote:

Originally Posted by BayArea_FRS (Post 3362550)

DId you ever figure this out? Its kind of frustrating that after all the work Open Flash did on making these tunes + making them flashable by the end user, they went with the cheapest shittiest tablets possible. I'd have gladly paid an extra 100$ to not have to pray to god every time I switch off E85

I've got the same issue and i fixed it by program back the ECU using Tactrix.