Took the car out to Road America for Gridlife this past weekend and the car felt stellar!

https://www.youtube.com/watch?v=oLKZEh_gkeI

My top 3 performance mods

https://www.youtube.com/watch?v=7bbb9oqo-Ug

Rented out the local track with a couple of buddies to see what kind of baseline I could get with the FRS as it sits.

https://www.youtube.com/watch?v=2Z5I2MsGZF0

Verus Engineering Brake Cooling Kit installed on the car today.

https://www.youtube.com/watch?v=hJIcyiRl0ug

Cut some holes in the hood today to install the Verus Engineering Hood Louver Kit.

https://www.youtube.com/watch?v=IdPTlbUZmz8

Grimmspeed Strut Tower Brace Installed

https://www.youtube.com/watch?v=Wr5Sms8AtRw

MORE DOWNFORCE!!!

https://www.youtube.com/watch?v=enyk...VHcTS2qb0ykAp8

Quick review of the FactionFab F-Spec Lowering Springs before I throw on a set of coilovers.

https://youtu.be/-Wh4MRdgpTg

Nice! Great cinematography btw!

Cleaned up the dirty exhaust tip on the Remark Boso Axleback

https://www.youtube.com/watch?v=dFsOYMpfcEM&t=1s

Saw you had a master cylinder brace and SS lines both. Did you install those at the same time, or one at a time? How's the feel with both mods installed?

SS lines were installed first and those are where you're going to feel the most difference. I can see the master cylinder brace reduces the deflection, but I wouldn't say I could feel a huge difference. I think if you did the brace without the ss lines you would feel a more noticeable difference. Brake pedal is very firm and consistent compared to the OEM lines.

Finally put some new wheels on the FRS today.

https://youtu.be/HlPqhMQZzg4

Looks much better than I would have expected..congrats.

And you have the advantage it will match the primer peeking through those nasty paint chips you'll inevitably get!