Good wing for stock trunk? toyota 86 2017
 

Whats a good wing that is easy to install and looks good on the stock bumper Toyota 86 2017.

Thank you!

Entirely subjective question.

To me, the Leg Sport duckbill is the best looking one; along with the Verus duckbill, which works well for the 17+ cars as it covers the factory spoiler holes.

SARD wing is gross. Pretty much any GT wing looks odd to me without proper aero. Swan neck GT wings belong on proper race cars. Chassis mount wings belong in the trash.

There is also the TRD spoiler.

Sard wing, the best.

Stock wing with risers


https://www.ft86motorsports.com/dram...17-86-brz.html

The factory TRD fin is subtle. The 86 GT wing with risers looks good too.

NUR SPEC

+1 for the Leg Sport Duckbill

Had that one on my blue BRZ and took it off when it totaled so that I can re-paint and re-purpose it for my new gray BRZ. I love the way it makes the car look and flow

The TRD duckbill gets my vote for looking the best with stock aero on the rest of the car. It flows nicely with the body lines, even the subtle lines on the trunk. Second favorite would be a lip spoiler. Third would be a wing with risers. That will look the most aggressive which isn’t necessarily a bad thing, but it will draw more attention. No wing or spoiler at all makes the rear end look boring and unfinished.

Mine is a replica of the TRD duckbill, the previous owner installed it. I took it off and cleaned everything really well and put it back on. It was slightly misaligned and it was bothering me. Lol [emoji28]

Please excuse my dirty car https://uploads.tapatalk-cdn.com/202...584496c753.jpg
https://uploads.tapatalk-cdn.com/202...ddcc389fa9.jpg
https://uploads.tapatalk-cdn.com/202...fe9a53572a.jpg
https://uploads.tapatalk-cdn.com/202...705e8e768f.jpg


Sent from my iPhone using Tapatalk

If you have the stock spoiler then your options are limited. 17+ holes are difficult to be covered.

can always try to trade trunk lids w/ someone with base model and same color.

Stock with risers for looks, Verus duckbill and wing for function.

I prefer the FIVE:AD spoiler over the TRD one. It's discontinued but are replicas out there.

Sorry to highjack the thread but are these spoilers attached with factory holes and bolts or with 3M tape?