2013 - BRZ LIMITED WHITE - Custom wide
 

SOLD for $15,900


Hey Everyone,
It's time to let the brz go to the next owner and make room to finish my RHD STI. I've had it since the fall of 2013, and in my humble but deadly accurate opinion is the best looking BRZ ever! It's true. Just ask the next owner. :D

Tastefully modded within the Subaru spirit.

Exterior:

- Custom flared steel rear fenders from Rand Motorsports.
Fit and clear 275-40/17s.
- Carbon Fiber Duckbill trunk - match painted white
- Grillcraft front grill
- Diode Dynamics - boomerang's on as driving lights.
- Relocated license plate

Wheels/Brakes/Suspension:

- 720 form Gt1 - 17x9 +35 rear 16.8 lbs!
- 17x8 +35 front 15.9 lbs!
- Tires: front 245-45-17 Michelin pilot super sports
Rear 275-40-17 Continental Conti sport (because the super sports don’t come in that size grrrr)
- Ferodo brake pads
- Motul RBF600 fluid

- Bilstein b14 Coilovers with custom valving from Bilstein. The higher-ups from Germany came over to drive the car and dial it in to set the standards for how they will market to our cars. Per them:
Front is dropped -25mm
Rear is dropped -28mm

Sits and rides perfectly.

Engine:

- Stromung dual tip exhaust
- Stromung single tip track pipe.

Scott, the owner of stromung, made these for me. They’re the only ones out in the wild. He’s too busy now working with BMW GT and indy class cars.

- OpenFlash OFT tablet
Tunes for stock, sport, and e85.
My nearest e85 station closed shortly after I purchased the OFT… grrrr

- K&N intake filter.


65,000 miles

Valve Spring Recall performed summer 2019 with 60K service.

Located in Pasadena.

more pics

PM’s replied

Ok. So I have one person coming today at 11 to look at it. I’ll wipe everything down and aired out afterwards so let me know if anyone wants to come later in the afternoon.

Can you tell us more about this - Custom flared steel rear fenders from Rand Motorsports.

How much wider?
Was it just a one off set?

Custom job on the car cut vertical slots, form the flare, and weld in triangles to fill the voids. This set the car a little over 2" wider on each side allowing for the beefy tires but staying within the stock lines. Here it is compared to stock.

How's the fitment up front with the 275s? :D Not sure what your wheel offset is either.

Another clean build, good luck with sale!

Hey man, it is a really cool ride and if it is still for sale, shoot me a text at 310-408-6929, I would love to come see it and work out a deal, I am a socal local.

Car has sold. Thanks for being a friendly, helpful community as we discovered this great platform! It's been fun. Those of you in Oxnard/Ventura might see this car over there now with the new owner!