Can anyone get STI motor mounts right now?
 

Can anyone get these? I've contacted a few people and nobody has any idea when they would ship. Also a few websites make you buy each side separately, is this common for this mount?

I have also read about TRD motor mounts but havent found those for sale anywhere. Is there any info on these available.

Basically, I've decided I hate the cusco trans and motor mounts I have put in. So I'm going to try the STI mount and the whiteline trans bushing. See what happens.

Keep an eye on classifieds. I have a hunch some will pop up soon.;)

If they're used and in great condition just lmk first, lol.

I have STI motor mounts and whitline trans mount. I would recommend.

Try facebook groups!

Does it transmit a whole bunch of vibration into your feet while cruising or a bunch of mechanical whining in to the cabin? What about take off or idle, especially with the AC on?

Same, perfect for NA. Not as much for FI.

I got sti mounts, Whiteline trans collar, whiteline rear diff collars, and Carbon fiber driveshaft. Didn’t notice any NVH increase.

Oem is a 1
STI is a 2
Perrin 3
Cusco 4
Solid 5

Only have experience with oem and sti at the moment. But reading every post on every thread in regards to any and all mounts this is what I concluded. I’ll have 1st hand with cusco when i swap this weekend.

The plan was to supercharge it, I just don't see that happening now. Still had the parts....I drove about 1,500 miles this past weekend and it was great in the mountains, but doing 78 on the highway was not enjoyable.

No noise from the motor mounts. There was a slight noise from the trans mount in the beginning. I removed trans mount and added more grease. I haven't herd it since. I plan on ordering perrin rear shifter mount in the nearby future.

I agree!

What drive shaft are you running?

Driveshaft shop

I have the TRD engine and gearbox mounts. They had "Subaru" molded in the rubber so I would suggest they are exactly the same as the STi units.

With my light flywheel and carbon drive shaft there was definitely a NVH increase, particularly under engine braking. Not overwhelming though.

As for where to get them, I got mine from a local supplier here in Australia, Import Monster. North Shore Toyota in New Zealand carry a lot of TRD product on the shelf and may be able to ship relatively easily to you.