Reliable 3bar map sensor?
 

As the title describes.

I’ve finally had PayPal return my money after a few weeks of no communication with Full Blown Motorsports so I won’t be going back to them. That’s the short story.

Previously I’ve had an Omni 3bar map sensor and I’m not 100% why it went cactus on me but I’m on the look for a reputable known good brand for testing the time of use for our cars, specially for forced induction.

Thanks !

AEM has a stainless steel MAP sensor

Jdl or full race.

Sent from my SM-N960U using Tapatalk

Bosch everytime
good enough for OEM so good enough for you and about £40 apiece

Good enough for an OEM stock map tune or a boosted setup?

Many, if not most, OEMs use Bosch sensors. You have plenty of different sensors to choose from as well, so pick the right one for what you want. You could even get a TMAP if it's of any use.

There's plenty of OEM cars running 1.5 bar of boost these days so 2.5 bar absolute

we run a 3 bar (abs) Bosch sensor on our SC kit with integral temp sensor and is about $45 plus they will sell you a matching connector for a few cents
why shop elswhere?

how can someone buy a map sensor from you guys? I need one for this weekend.

what with COVID and all there's not much going on in terms of deliveries

I'd say get in touch with your local parts factor and ask for a Bosch sensor PN 0281002437

this is a 3 bar unit

these guys also sell it
but not cheap
https://www.ecstuning.com/b-bosch-pa...ar/0281002437/