Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Canada Classifieds (https://www.ft86club.com/forums/forumdisplay.php?f=76)
-   -   14 Lava FRS for sale London CHEAP (https://www.ft86club.com/forums/showthread.php?t=139116)

Tcoat 02-25-2020 10:35 AM

14 Lava FRS for sale London CHEAP
 
OK so I will only be able to able to offer this deal until it goes for trade in two weeks and the price goes up at dealer auction or a used car lot.

2014 Hot Lava in London, Ontario

NOT A GARAGE QUEEN SO NOT PERFECT!Not awful either though.
270,000 kilometers. This is 98% highway with cruise control on so the wear on the mechanical, brakes, etc is not what you would expect with that mileage. Nevr tracked or beat on as it was my work commuter not a race car.

Lowered on RSR Superdown lowering springs. All suspension dealer inspected a month ago and in great shape.
TRD exhaust. Tips look like crap but will clean up nice.
TRD drop in filter. Cool noise. Cleaned and reoiled in the fall.
Full window tint. Small spot in corner of driver door damaged but easily fixed.
Scion spoiler. Port installed and nice and tight still.
Rest still stock.
Newish Michelin Pilot Sport A/S 3+ tires. Loads of life left. Stock wheels are like new.

Interior is good with some wear on the drivers seat (I spent a shitload of time in that seat)

Paint and body not horrible but does have some chips and dings from all that time on the 401. There is some ugly but totally repairable rust at top of windshield. Arrangements for repair of all the dings and a paint job FREE OF CHARGE are in place for later in the summer. Would be up to buyer to get it there and leave it until done. Details can be discussed.

Engine is a dirty dirty girl and looks like crap from the road crap blowing up in there but runs flawlessly. I have no idea where the CEL even is since I have never seen it come on.

New battery in 2018 still at 100%. New updated TOB and clutch in December 2018 (or 17 I don't remember).

A quick check says the average price for one with this mileage and condition is $15,000 (AMERICANS NEED NOT BOTHER SAYING TOO MUCH SINCE THIS IS CANADA AND THESE ARE THE PRICES HERE. It doesn't matter what they sell for in California or Buttfck Arkansas. )
I am asking $10,000 as is. Will listen to any reasonable offer though.


As I said at the start this is only available until my new car shows up at the dealer mid March. I would really rather sell it to somebody I know will treat it well since I know I will shed tears as it leaves the driveway for the last time. We spent a lot of time together!


Please email me at tcoat86@outlook.com


https://www.ft86club.com/forums/pict...ictureid=11358
https://www.ft86club.com/forums/pict...ictureid=11846
https://www.ft86club.com/forums/pict...ictureid=11845


From ice block frozen to ground in parking lot


https://www.ft86club.com/forums/pict...ictureid=11848


Insurance claim on file was to fix this


https://www.ft86club.com/forums/pict...ictureid=11847


Small dent the size of a dime on top of fender. Rist is a surface discoloration only


https://www.ft86club.com/forums/pict...ictureid=11849


Rust along front of roof. This has been ground out and colour "match" painted but will need more permeant ix


https://www.ft86club.com/forums/pict...ictureid=11850


And for proof it is really mine


https://www.ft86club.com/forums/atta...1&d=1582403153

R2 02-26-2020 06:47 PM

What’s the replacement for this beauty?

RickyRacer 02-28-2020 01:41 PM

What did you buy Tcoat?

Tcoat 02-28-2020 02:32 PM

https://www.ft86club.com/forums/atta...1&d=1582677291


https://www.ft86club.com/forums/atta...1&d=1582677320


https://www.ft86club.com/forums/atta...1&d=1582677320

Dadhawk 02-28-2020 02:46 PM

1 Attachment(s)
Looks great. BTW, heres' the design for that first Mod you need.

chaoskaze 02-28-2020 02:53 PM

Quote:

Originally Posted by Tcoat (Post 3303582)

YAAAAAAA :cheers::thumbup:

Tcoat 02-28-2020 02:57 PM

Quote:

Originally Posted by Dadhawk (Post 3303587)
Looks great. BTW, heres' the design for that first Mod you need.

My son says it needs pumpkin bomb sticker on the fuel filler door.


https://thumbs.worthpoint.com/zoom/i...e52ea76afe.jpg

JD001 02-28-2020 03:00 PM

First mod, clear side markers as they'll work well with the fender emblems..

Tcoat 02-28-2020 03:05 PM

Quote:

Originally Posted by JD001 (Post 3303595)
First mod, clear side markers as they'll work well with the fender emblems..

Nope. Not clear.
https://www.ft86club.com/forums/show...96#post3303596


https://www.ft86club.com/forums/atta...1&d=1582904716


And


https://lh3.googleusercontent.com/pr...93yLwFpsApXHc8

JD001 02-28-2020 03:11 PM


Slightly lower and some wheel spacers, the flush fit will really show off the lovely colour.

As for the side markers, I think the European versions will look less blingy. You don't want to draw attention to them..

Dadhawk 02-28-2020 03:11 PM

1 Attachment(s)
Quote:

Originally Posted by Tcoat (Post 3303593)
My son says it needs pumpkin bomb sticker on the fuel filler door.

Well with the wheels this might be a better choice on the hood....

(or maybe a Japanese version of it)

Tcoat 02-28-2020 03:16 PM

Quote:

Originally Posted by JD001 (Post 3303602)
Slightly lower and some wheel spacers, the flush fit will really show off the lovely colour.

As for the side markers, I think the European versions will look less blingy. You don't want to draw attention to them..

Gonna try it at stock height for a while. The Lava certainly had to go down because the bright colour creates a big black void out of the wheel gap. My initial impression of the green is I will be fine with the gap.
It would be nice to be able to approach a driveway entrance or speed bump without having to do the calculations for the angle and speed of approach.


https://media.istockphoto.com/photos...re-id531842754

Tcoat 02-28-2020 03:18 PM

Quote:

Originally Posted by Dadhawk (Post 3303603)
Well with the wheels this might be a better choice on the hood....

(or maybe a Japanese version of it)


https://encrypted-tbn0.gstatic.com/i...URrWsepcmOG-Tx

Dadhawk 02-28-2020 04:31 PM

1 Attachment(s)
Quote:

Originally Posted by Tcoat (Post 3303607)

That would work, although you might want a more full on frontal view....


All times are GMT -4. The time now is 05:40 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.