Valenti Sequential DIY
 

Hi guys, I have the jewel valenti tail lights and when I first bought them 5 months ago I didnt get sequential because I didnt like the look. Is there any possible way i can convert them to work sequentially?https://uploads.tapatalk-cdn.com/202...81fefbd665.jpg

Sent from my SM-G950W using Tapatalk

There is, if you know how to work with LED controllers or know someone. Otherwise, there isn't really a plug and play kit. I tried searching for my gen 1 Valenti.

I believe the sequential kit just adds some sort of module inline.
I'm not aware of what the module is, or exactly what it does, but I would assume it's some arrangement of resistors, inductors, and capacitors.

On the sequential tail lights, you can flip the switch on or off to go from normal/sequential mode.

The module taps into the signal and "slows it down" via timing.


Here is an example module I came across on my research:


https://youtu.be/0c8jCZzVvGU?t=86


Problem is, it slows down the signal in "chunks" instead of a flow. Even if you buy the "mustang sequential one", you'll have to tap into each individual LED I believe: https://www.amazon.com/dp/B079K6GHWM..._0vEkEbPHZATV2.


This is where someone who messes with circuits/led controllers come in and that's out of my expertise.

Not sure if it can be done, and if yes not worth the hassle. Sell yours and buy the sequentials, either from ebay or directly from The Speedline. That's where I got mine ~3 1/2 years ago, still working.
https://www.ebay.com/sch/i.html?_fro...e%3ABY_VEHICLE

http://www.thespeedline.com/brands/Valenti.html