Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   Decatted my stock frontpipe (https://www.ft86club.com/forums/showthread.php?t=138275)

Contender 12-23-2019 11:23 PM

Decatted my stock frontpipe
 
I am running a muffler delete as well no raspy sound just deeper exhaust tone. Plus it just seems to run smoother maybe a placebo effect but, either way it has got to be a more free flowing exhaust.

86MLR 12-24-2019 01:10 AM

Quote:

Originally Posted by Contender (Post 3285484)
I am running a muffler delete as well no raspy sound just deeper exhaust tone. Plus it just seems to run smoother maybe a placebo effect but, either way it has got to be a more free flowing exhaust.

I made around 200hp with a full decat on the OEM exhaust.

If your staying NA the cats are the only real restriction.

86MLR 12-24-2019 01:59 AM

Quote:

Originally Posted by Contender (Post 3285484)
I am running a muffler delete as well no raspy sound just deeper exhaust tone. Plus it just seems to run smoother maybe a placebo effect but, either way it has got to be a more free flowing exhaust.

I made around 200hp with a full decat on the OEM exhaust.

If your staying NA the cats are the only real restriction.

humfrz 12-24-2019 02:20 AM

We heard you the first time - :D


humfrz

Grady 12-24-2019 07:52 AM

You know old people, you start hearing the same story over and over, only the fish gets bigger and bigger. Next time he post it it will be 250hp.

Breadman 12-24-2019 08:48 AM

Quote:

Originally Posted by Grady (Post 3285522)
You know old people, you start hearing the same story over and over, only the fish gets bigger and bigger. Next time he post it it will be 250hp.


i think it was a joke because the car is 200hp stock

JD001 12-24-2019 09:24 AM

Quote:

Originally Posted by humfrz (Post 3285506)
We heard you the first time - :D


humfrz

Decatted pipe makes some noise you know.. so possible hearing DAMAGE! Did you GET THAT!!

toast 12-24-2019 10:22 AM

Quote:

Originally Posted by Breadman (Post 3285530)
i think it was a joke because the car is 200hp stock

You are quoting manufacturer crankshaft numbers and he is talking about dyno measurement at the wheels. Not a joke.

Contender 12-24-2019 10:22 AM

Lol..that's funny but yes I do plan on getting out the header cat soon and getting a tune. Funny I thought the muffler delete would have been annoying at cold start it is but after that I don't think so. I have had people complementing me on how good the car sounds. I has some drone but took care of that with some insulated air duct wrap in the trunk and under the rear seat area. Worked out good and the wife was happy with the cabin drone reduction.

StraightOuttaCanadaEh 12-24-2019 10:28 AM

How does one decat something? Is this something a mechanic can do or do I have to go to a dedicated exhaust shop?

Grady 12-24-2019 11:04 AM

Quote:

Originally Posted by Contender (Post 3285549)
Lol..that's funny but yes I do plan on getting out the header cat soon and getting a tune. Funny I thought the muffler delete would have been annoying at cold start it is but after that I don't think so. I have had people complementing me on how good the car sounds. I has some drone but took care of that with some insulated air duct wrap in the trunk and under the rear seat area. Worked out good and the wife was happy with the cabin drone reduction.

The cats muffle the sound a lot. Cats and no muffler sounds good, no cats and muffler sounds good. No cats and no mufflers will piss of the Neibor hood.

RToyo86 12-24-2019 11:08 AM

Quote:

Originally Posted by StraightOuttaCanadaEh (Post 3285550)
How does one decat something? Is this something a mechanic can do or do I have to go to a dedicated exhaust shop?

A chisel/long pointy thing and a hammer.
Smashy smashy and voila, decatted pipe/header.

Stomachbuzz 12-24-2019 11:29 AM

Quote:

Originally Posted by RToyo86 (Post 3285565)
A chisel/long pointy thing and a hammer.
Smashy smashy and voila, decatted pipe/header.

you mean just stabbing out the honeycomb structure from the inside?

I thought you would have had to cut the cat off and then weld on new pipe in its place

DarkPira7e 12-24-2019 12:07 PM

Quote:

Originally Posted by Stomachbuzz (Post 3285570)
you mean just stabbing out the honeycomb structure from the inside?

I thought you would have had to cut the cat off and then weld on new pipe in its place

That's the way for someone who wants to spend on material and have it done right. Screwdriver, hammer, and a mask is basically free!
Also, if your local laws enforce emissions and visually check for the cat, you'll pass


All times are GMT -4. The time now is 08:27 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.