https://live.staticflickr.com/65535/...77f8a6ac_b.jpg

Tire Slayer LS2 Powered FRS - Featuring APEX ARC-8 Wheels


Many of you may have been caught drooling over ft86club member @spitsnaugle's insanely clean LS2 powered FRS, as his build thread has been ongoing here since June of 2018. Having formally owned an LS-powered 240Z, Joel is quite familiar with the art of tire slaying. This machine quickly became a favorite amongst the APEX staff, and we recently assigned Shutter Fuel Media to capture it in the wild.

Lightweight 17" wheels in a chassis specific width and offset is one of the key modifications 86/BRZ track enthusiasts like Joel count on for maximizing performance, reducing rotational mass, and mitigating the seasonal tire budget. The 17.8 lbs ARC-8 was designed with brake clearance in mind, clearing a variety of big brake kits including the factory Brembo's found on the Performance Package BRZ and TRD SE 86 models.


[ame]https://www.youtube.com/watch?v=MZv46v16FW0[/ame]


WHEELS & TIRES
APEX ARC-8 17×9″ ET42 Wheels in Satin Bronze
Hoosier A7 Tires F: 245/40-17 / R: 275/35-17

SUSPENSION & BRAKES
CounterSpace Garage Spec’d Tein Flex A Coilovers
SPC Adjustable LCA’s
Alignment: F. -3.5º / R. -2.1º camber
Cadillac ATS Brembo front Brakes (near identical to PP Brembo's)
2014 STI Brembo rear brakes (keeps brake bias in check with front upgrade)
Street pads: F. Winmax W3 / R. ebc red stuff
AutoX pads: F. Winmax W3 / R. W4
Road Course pads: F. CounterSpaceGarage C2 / R. Project Mu Club Racer

MOTOR & TUNING
LS2 Swap - Dyno’d 440 HP / 426 TQ at the wheels
T56 m12 trans (GTO)
GTO throttle pedal
E40 ECU.
K1 forged 3.622 crank
wiseco pistons
Callies compstar rods
LS7 Lifters
Melling 10295 oil pump.
ImprovedRacing Baffle
Accusump
Monster twin disc LT1-S clutch
New slave cylinder and remote bleed
Sikky short throw shifter
KATECH ported 243 heads
FAST Intake
FAST fuel rails
D514 coils
Brian Tooley Racing Cam
Lightweight Yella Terra 1.7 rockers.
Chromoly push rods.
Meziere electric water pump.
C5R timing chain.
Lokar Flexible Dipstick
ATI super damper
Holley AC Mount #20-159
Sanden SD7B10 compressor
East Coast Auto Electric mini alternator
Custom Alternator mount for corvette spacing.
MSD Wires 32073
... and much more to complete the swap

EXTERIOR/AERO
Trackspec Hood Vents
Varis Arising Adjustable GT Wing
Verus Front Splitter
Verus Rear Diffuser
2017 BRZ tail lights
2013 BRZ headlights
BRZ Leather/Alcantara heated seat and console swap

https://live.staticflickr.com/65535/...57482e16_b.jpg

https://live.staticflickr.com/65535/...22c2f43d_b.jpg

https://live.staticflickr.com/65535/...2f39fe12_b.jpg

https://live.staticflickr.com/65535/...cec860b9_b.jpg

https://live.staticflickr.com/65535/...8ab80e9a_b.jpg

https://live.staticflickr.com/65535/...ce437321_b.jpg

https://live.staticflickr.com/65535/...ca591b4a_b.jpg

https://live.staticflickr.com/65535/...e9c21c7f_b.jpg

https://live.staticflickr.com/65535/...89923f79_b.jpg

PHOTOGRAPHY: Shutter Fuel | @shutterfuel
OWNER/DRIVER: Joel | @spitsnaugle

Originally Posted by Icecreamtruk (Post 3279118) Is a wider 17 wheel still on the plans for next year? I was so jelly when I saw the group buy for the BMW wheels, I opened up that form so many times in vain hopes that a bolt pattern option would magically show up!