SOLD - Used Radium Engineering Catch Can kit for sale
 

SOLD



Used Radium Engineering catch can kit for mounting on the DRIVER SIDE for better access. Installed for appox 7k miles. Looks almost new. Comes with everything shown below (can, hardware, hoses, extra hoses).



$150 picked up in SoCal (North Redondo), $165 shipped to lower 50 states.



https://i.imgur.com/Ifk1123.jpg

https://i.imgur.com/54M7w8h.jpg

The Radium crank case and PCV kits are identical except for mounting positions. Typically, the crank case can mounts on the driver side and the PCV can mounts on the passenger side. I chose the driver side location as there was more mounting space without the battery there.


The catch can fittings are 1/2" dia, while the PCV fittings are 3/8". The kit only comes with a length of 1/2" hose, so I bought a length of 3/8" hose and 3/8" to 1/2" barb connectors.



Picture mounted on driver's side.


http://i.imgur.com/IwX22WH.jpg

PM sent.

Sent from my SM-G960U using Tapatalk

SOLD - please close, thank you.