Nur Spec Side Skirt installation template?
 

Does anyone have a template on where to drill in the side panel for this side skirt installation?

Thanks in advance :)

@d0aner, Nur spec/aero kit parts are hard to come by within the forums, especially the templates. Your best bet is either have a body shop do it or put some marks (I.E. toothpaste) where the clips slide in on the side skirt and imprint it onto the side of the vehicle. These parts are usually factory installed if I recall due to it having to be drilled into the side of the car.

@Bach415 - thank you, probably will head to a body shop now. Initially thought the TRD and Nur spec side skirts were the same thing, wished I knew that before purchasing them haha

Np. TRD and Nur Spec/Aero kit are completely different. Nur spec has one mounting point in the front with the rest of the mounting points drilled into the side of the car w/o weather stripping. TRD has 2 mounting points in the front and 2 in the rear without the need of drilling and using weather stripping + adhesive to hold onto the side. I personally have the nur spec side skirts that are being repaired (slowly). I am converting it to work like the TRD ones w/o drilling.

TRD ones do have five holes on the bottom. They clip into the bottom of the rocker panel. Unless you mean drilling elsewhere.

Both the trd and nur spec has the 5 holes at the bottom of the rocker panel. Nur spec actually requires you to drill into the panel right under the door as there will be clips that hold the side skirt into the body. It’s like the wrx sti side skirts mount but without the holes actually being premade