Rattle after replacing throwout bearing
 

Just replaced my throwout bearing around 60k after i seem to have a rattle. It rattles on idle and when puch down on the clutch any ideas on what it could be? I made sure to torque all the bolts down on the trans and driveshaft. Might be a rattle from the invidia front pipe i just installed aswell. Over all the car drives great so im not too worried but just curious.

I'd suspect the front pipe first. Maybe put the old front pipe back on and see if the rattle goes away.

humfrz

Rattles are the worse. It's always something that's not properly bolted down.
Given your recent repairs it could be some heat sheld or the front pipe hitting/rubbing on some thing.

With proper gloves try moving the pipe around while the car is on. Just be safe about it.

lol i just remembered i dropped a nut into the over pipe heat shield when i was installing the front pipe and after 10 hrs on my back working on this car i wasnt about to waste more time digging it out. Thanks for the input guys.