Hubcentric Rings for my RPF1s
 

Hi all,

I just had a shop tell me I'm missing my hub centric rings. When I think about, it i'm not sure I ever had them in the first place.

I know my hub bore is 56.1mm, and the rpf1s are 73mm, but I'm seeing lots of universal items that are "56mm" or even "73.1mm". Will these fit my needs? I am looking for metal rings as well.

These are the one's I am looking at.

https://www.rallysportdirect.com/par...-1mm-to-56-1mm

TIA

Order your rings from Motorsport Tech. They're high quality billet CNC parts, made specific to your needs.

http://www.motorsport-tech.com/hub_rings.html


The center bore on your RPF1s is 73.0mm, not 73.1mm, and it makes a difference. If you get precision machined rings you should be able to use a rubber mallet or deadblow to put them into place and they will seat fully, semi-permanently adapting the wheels to your car's hub diameter.

We have Enkei hub rings in stock, 73mm to 56.1. Price is $10 for all four before shipping. PM me with your postal code and I'll get you a price shipped.

-Sam

I sanded mine down for some clearance prior to fitting, you will need to do this if you ever want to fit a full sizes spare or space saver on it.

Thank you but unfortunately I need metal ones.

I hear the plastic ones can melt under track use...

I never had my plastic ones melt, but they did crack and fall out when pulling my wheels off after a few track days, which is why I switched to metal.

Why do you need these?

Well I don't know if I "need" them. I haven't run them for like 70k miles and my wheels haven't fallen off so I assume I truly don't need them. Just for piece of mind as the roads around me are getting worse and worse...