|
Oil feed
So I tried to look this up but didn’t find my answer what size fitting is the oil feed for the turbo which is a hex bolt left of the ac pump
Sent from my iPhone using Tapatalk |
|
8 mm. Don't use a cheap forged one with rounded vertices. It's in there fucking tight.
|
It's a real pain to crack loose. Hammer your bit in to make sure it doesn't round out the plug.
https://i.imgur.com/E4wElrP.jpg |
I used a hand impact driver. These were a life saver back in the days when motorcycle engine case bolts were phillips head.
https://www.homedepot.com/p/Klein-To...B&gclsrc=aw.ds |
| All times are GMT -4. The time now is 12:29 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.