FR-S BRZ to Corolla (Lug Nut Sizes)
 

Hey guys, I had a long weekend trying to install my 2017 BRZ wheels
on my 2017 Toyota Corolla. I had both cars on jack stands and to my surprise the BRZ wheels did NOT clear both front and rear calipers on the Corolla.
I was so frustrated because I had installed my new wheels on the BRZ.
I had to remove the new wheels and put back my stocks. It was really hot outside with some light rain.

I have ordered 20mm spacers for the Corolla. I know the lug for the corolla are 12x1.5 already. My question is, What seat type, length and width do i need for the OEM BRZ wheel?

I have these:
http://i.imgur.com/CPvXnfGl.jpg

OEM wheels also have the pockets to clear the spacer studs:
https://i.imgur.com/rtGoTisl.jpg

If you bought spacers with 12x1.5 threads, you should be able to reuse the Corolla lug nuts. If you bought spacers for a FRS/BRZ, youll need aftermarket 12x1.25 lug nuts. And as long as youre hubcentric, any will do just fine.

no, the corolla lug nuts use a Mag seat with a washer. I am looking for a lug nut similar to the OEM Subaru one. Just want to be 100% before buying a new set.

Oh thats right. In that case, go to Toyota and get a set for the steel wheels (16") or find a similar one online. The seat profile should fit. The older Crayolas had standard lugs. They switched in... 2017?

I am going for these.

https://www.ebay.com/itm/20X-Chrome-...725e%7Ciid%3A1