Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 5 1 2345
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Forced Induction (https://www.ft86club.com/forums/forumdisplay.php?f=78)
-   -   Greddy T518Z Whp (https://www.ft86club.com/forums/showthread.php?t=134545)

j_ros94 05-06-2019 11:08 PM
Greddy T518Z Whp
 
Im making 338whp with greddy t518z with dw 700cc fuel injectors 65c fuel pump
Skuns 2 oil cooler
Radium engineering dual catch can
Competitive stage 3 clutch with forge flywheel and omni 3 bar map. Is this ok?https://uploads.tapatalk-cdn.com/201...6fdfc9c37d.jpghttps://uploads.tapatalk-cdn.com/201...f82fd887d2.jpg

Sent from my SM-G960W using Tapatalk

jflogerzi 05-07-2019 12:33 AM
Not sure what your asking? With knowing fuel type, tuner and PSI... We don't read minds

Sent from my ONEPLUS A5010 using Tapatalk

DarkPira7e 05-07-2019 12:44 AM
This is like holding a lit match under paper. It's only fine until it's not fine. There's no way of knowing if it's too close to the paper until it ignites.

j_ros94 05-07-2019 03:06 AM
94 pump tuned by sasha from onpoint dyno and he said peak boost was 13 psi

Sent from my SM-G960W using Tapatalk

WC-BRZ 05-07-2019 03:21 AM
How many miles have you had on this kit so far with the 338whp tune?



Is this a daily driven car? Any autocross or track days?



Are you on the stock motor mounts? Stock Subframe and diff bushings as well?



Is it true that this setup actually spools surprisingly quick for what it is? Do you find it kind of falls on its face at redline or does it feel strong all the way?



Any regrets on your build so far?



Excuse all the abrupt questions but I currently have the biggest hard on for this kit - to me it seems like the best bang for buck. Thanks for posting this up :thumbup::thanks:

j_ros94 05-07-2019 06:52 AM
Quote:
Originally Posted by WC-BRZ (Post 3215032)
How many miles have you had on this kit so far with the 338whp tune?



Is this a daily driven car? Any autocross or track days?



Are you on the stock motor mounts? Stock Subframe and diff bushings as well?



Is it true that this setup actually spools surprisingly quick for what it is? Do you find it kind of falls on its face at redline or does it feel strong all the way?



Any regrets on your build so far?



Excuse all the abrupt questions but I currently have the biggest hard on for this kit - to me it seems like the best bang for buck. Thanks for posting this up [emoji106]:thanks:
I just got the kit recently installed less than a week ago. Engine motor and diff bushings are fully stock. It does spool quickly. No regrets just a little concerned how it got to 13psi peak boost.

Sent from my SM-G960W using Tapatalk

tomm.brz 05-07-2019 09:02 AM
looks good


your radium catch can crank side (on the right, in your picture) seems routed wrong
tube tube that comes from the crank should go in the upper hole of the catch can, according to the radium instructions

j_ros94 05-07-2019 04:36 PM
Quote:
Originally Posted by tomm.brz (Post 3215048)
looks good


your radium catch can crank side (on the right, in your picture) seems routed wrong
tube tube that comes from the crank should go in the upper hole of the catch can, according to the radium instructions
Thanks for the heads up. Im gonna see if they can fix it for me.

Sent from my SM-G960W using Tapatalk

CSG Mike 05-10-2019 01:05 PM
That's some solid power!

Do you have a picture of the full curve?

j_ros94 05-10-2019 01:08 PM
Quote:
Originally Posted by CSG Mike (Post 3216165)
That's some solid power!

Do you have a picture of the full curve?
I dont, unfortunately. I wanted to take a pic of the peak boost cuz it made 13psi

Sent from my SM-G960W using Tapatalk

Irace86.2.0 05-10-2019 01:08 PM
Quote:
Originally Posted by j_ros94 (Post 3215218)
Thanks for the heads up. Im gonna see if they can fix it for me.

Sent from my SM-G960W using Tapatalk
Have them pull out that useless sound tube too.

jflogerzi 05-10-2019 01:08 PM
Quote:
Originally Posted by CSG Mike (Post 3216165)
That's some solid power!

Do you have a picture of the full curve?
Second. For pump those are good numbers. Not sure I would run 13psi on pump but you do have 94.. do you have e85 around you?

Sent from my ONEPLUS A5010 using Tapatalk

j_ros94 05-10-2019 01:10 PM
Quote:
Originally Posted by Irace86.2.0 (Post 3216171)
Have them pull out that useless sound tube too.
What sound tube?

Sent from my SM-G960W using Tapatalk

j_ros94 05-10-2019 01:11 PM
Quote:
Originally Posted by jflogerzi (Post 3216172)
Second. For pump those are good numbers. Not sure I would run 13psi on pump but you do have 94.. do you have e85 around you?

Sent from my ONEPLUS A5010 using Tapatalk
I have 94 no e85. Im gonna see if we can adjust the actuator arm cuz 13 psi is nice and all but reliability > power lol


Sent from my SM-G960W using Tapatalk


All times are GMT -4. The time now is 08:14 AM.
Page 1 of 5 1 2345
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.