Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   Anyone Using Stock STI Injectors? (https://www.ft86club.com/forums/showthread.php?t=133886)

DarkPira7e 04-04-2019 01:01 PM

Anyone Using Stock STI Injectors?
 
I've been searching exhaustively, so I feel comfortable asking this here. Is anyone using blue or pink STI injectors? They are in near unlimited supply, and can be had far cheaper than new injectors.

If they require modification, what is involved? Seems like they just may need a spacer.

I am not looking for feedback on IF I should do this. I'm asking for the sake of asking, as I may be doing. If I had my car currently I'd just check and see.

Ok go.

DarkPira7e 04-08-2019 02:54 PM

Whooo, I guess that's a no. Not surprised. I'll document my efforts, whether or not I can get them to work for me.

KingJon1991 04-29-2019 10:52 AM

not going to work your going to need a tune

2slowbrz 07-02-2020 09:45 PM

Would also love to know if any other injectors work there tons cheaper then brz specific

DarkPira7e 07-02-2020 10:02 PM

I ended up using them and had no issues. Just needed to fabricate a spacer for the rails.

https://i.imgur.com/SphGTzr.jpg

https://i.imgur.com/Svkw0Kc.jpg

https://i.imgur.com/DPehTTj.jpg

Made about 330whp using them

sato 07-02-2020 10:23 PM

So what benefits are you seeing other than lower cost of new injectors? What are you up to?

DarkPira7e 07-02-2020 10:38 PM

Quote:

Originally Posted by sato (Post 3346062)
So what benefits are you seeing other than lower cost of new injectors? What are you up to?

The only advantage was that I had them from a bugeye I owned years ago. I'm going to be buying ECUTEK's 750cc injector package so that I have injectors that aren't 15 years old in my new build

sato 07-03-2020 07:37 AM

Alright. Good luck with build but thanks for sharing your experience.

ericfey7 12-17-2022 04:54 AM

Quote:

Originally Posted by DarkPira7e (Post 3346060)
I ended up using them and had no issues. Just needed to fabricate a spacer for the rails.

https://i.imgur.com/SphGTzr.jpg

https://i.imgur.com/Svkw0Kc.jpg

https://i.imgur.com/DPehTTj.jpg

Made about 330whp using them

sorry to bump old thread. Jsut curious do you need to mod the adapter or its' plug & play ? any other modification require to fit these injectors?

DarkPira7e 12-17-2022 02:07 PM

Quote:

Originally Posted by ericfey7 (Post 3560738)
sorry to bump old thread. Jsut curious do you need to mod the adapter or its' plug & play ? any other modification require to fit these injectors?

Had to make little spacers so the rails could seat properly. Plug and play otherwise

ericfey7 12-22-2022 01:16 AM

Quote:

Originally Posted by DarkPira7e (Post 3560772)
Had to make little spacers so the rails could seat properly. Plug and play otherwise

awesome!
did you cleaning& replaced the o-ring prior install?
these injector are pretty aged though. assuming you still running them, any specific issue along the way?

DarkPira7e 12-22-2022 08:37 AM

Quote:

Originally Posted by ericfey7 (Post 3561346)
awesome!
did you cleaning& replaced the o-ring prior install?
these injector are pretty aged though. assuming you still running them, any specific issue along the way?


I didn't bother cleaning or changing anything when I threw them on. They worked flawlessly, I switched to ID1050x injectors because my goals changed. I trusted these injectors because they were my mine to begin with and I know they ran fine before I pulled them

ericfey7 12-23-2022 05:18 AM

Quote:

Originally Posted by DarkPira7e (Post 3561364)
I didn't bother cleaning or changing anything when I threw them on. They worked flawlessly, I switched to ID1050x injectors because my goals changed. I trusted these injectors because they were my mine to begin with and I know they ran fine before I pulled them

approx how many horse power are these injector limit to?

x808drifter 12-23-2022 07:52 AM

Quote:

Originally Posted by ericfey7 (Post 3561476)
approx how many horse power are these injector limit to?

182-2,912HP and anything in between. (even more if you add more cylinders)

Fuck I hate people who don't even search before asking a question.
https://res.cloudinary.com/teepublic...25150149_0.jpg


All times are GMT -4. The time now is 02:04 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.