EMPTY HOLES
 

Are there any caps or fillers available to cover the holes in the 2019 BRZ deck lid after removing the wing---or perhaps a small lip spoiler that can be installed in its place?

:thanks:

RT

If you end up wanting to plug the holes rather than getting a small lip spoiler, these might work well (depending on the size of the holes):

https://www.bumperplugs.com/index.ph...gory&path=1_11

I ordered a pair to fill the drilled holes in my front bumper since I don't have or need a front plate. Color match was perfect.

Trunk swap.

From what I understand, there are currently no readily available “lip spoilers” that will cover the holes left from removing wings off the 2017+ models. Not only are there 2 holes per mounting spot, but also a clip for each side.

Look up some of the “Drambeenie spoiler riser” install threads/videos to identify the holes.

Also, if one was to find tasteful lip spoilers that do cover the holes, I’d be interested.

At the moment I'm pretty sure your only option would be a trunk swap. Those listed in the link above wouldn't cover the forward most holes left from the clips on the spoiler.