FS: 2014 BRZ Limited 6MT Modified (SOLD)
 

Update: CAR has been sold

This one owner BRZ has been my 2nd car that I’ve used commuting and driven at HPDE events.
Fully documented service history including oil / fluid changes and modifications.

2014 Subaru BRZ Limited Manual:
19,6XX miles (may get a few more)
WR Blue Pearl paint
6 speed manual trans
Clean title


Mods:
Custom 4 point roll-bar:
Fabricated by 425 Motorsports in Bellevue, WA
MIG/TIG welded 1.5” x 0.120” round steel tubing
Grey powder coat matches interior

Engine/exhaust:
Custom ECUTEK dyno tune by Drift Office in Auburn, WA
Tomei UEL headers (not catted)
2.5” exhaust with ISR dual exit muffler
HKS Oil Cooler kit. Cooler mounted in custom box for better airflow
Cusco strengthened motor mounts
Whiteline gearbox Positive Shift Kit

Suspension / wheels:
17x8” Enkei racing RFP1 wheels in gold
Grimmspeed front strut tower brace
HKS Hypermax SP coilovers
Car is currently rides approx 1” lower than stock
Corner balanced by Tru Line: www.trulinebellevue.com
With a driver weight of 170, the gross weight is 2,931
Whiteline 22mm front sway Bar
Whiteline 18mm rear sway bar

Brakes:
APR carbon fiber brake duct kit
Grimmspeed master cylinder brace
Stoptech SS brake lines
Front rotors: DBA T3 4000 Front (installed August 2018)
Rear rotors: EBS PWS 126.47031S-GRP
Front and rear brake pads: Hawk HP+ (installed August 2018)

Fluids have been regularly changed and full service records are available:

Engine: Mobile 1 full synthetic 0W 40
Rear Diff: Redline 75W-90 GL-5
Manual trans fluid: Redline MT-90
Brake fluid: Castrol SRF Racing Brake Fluid

All original parts that have come off the car are included such as the OEM headers, exhaust, brakes, anti-roll bars, fog lamps, etc…

Additional Extras:
OMP WRC-R fiberglass racing seats
OMP 806 HANS Harness 6 Points
Planted racing seat mounts:
Driver side mount excludes seat rails (bolts to floor with lower seating position)
Passenger seat mount includes extra seat rails



Higher quality images:

https://imgur.com/a7ihfdg
https://imgur.com/axFM1bC
https://imgur.com/1vP4AB7
https://imgur.com/vyRmwzV
https://imgur.com/nU6IxSe
https://imgur.com/YFhBlqM
https://imgur.com/Olpi4zR
https://imgur.com/4FMlhTH
https://imgur.com/G2I6AQf
https://imgur.com/drOZwGc
https://imgur.com/JG00yO6
https://imgur.com/09Ik8Oj
https://imgur.com/v3GUmsY
https://imgur.com/lIUOd3Y
https://imgur.com/3NquiQD
https://imgur.com/3vczMHs
https://imgur.com/X6HRoKX
https://imgur.com/puyAbtF
https://imgur.com/VGzMTmD
https://imgur.com/Z24YdDN
https://imgur.com/xWjFO3i
https://imgur.com/2sYqvuc

Hi Cascade86,


I have a few questions for you...
Where in WA are you located?
Are you the original owner from new?
The title has no liens on it?
Has the vehicle every had any body work or paintwork?
Have you ever gotten any CEL?


Thanks in advance,
Will

Hi Will,

Thanks for reaching out, my responses are below
Where in WA are you located?
- I'm within 30 minutes of downtown Seattle
Are you the original owner from new?
- Yes, purchased new from Renton Subaru in WA
The title has no liens on it?
- No liens on the car
Has the vehicle every had any body work or paintwork?
- The car has had some minor body/paintwork all done at a reputable body shop from which I have receipts: replaced rear bumper scratched in a parking lot, rear quarter panel color sanded and polished to remove water stain from leaky pipe in garage, front bumper re-sprayed after another shop scratched front bumper near Subaru emblem.
Have you ever gotten any CEL?
- The check engine light has come on once for "body control module" code 6ish months ago. Went away after I reset the module in the trunk and hasn't come on since.

Clean car! GLWS

Thanks for the info Cascade86. Sending you a PM.

Just uploaded the sale photo per forum rules, thank for the reminder ichi

PM’d