Custom Order Group Buy - Enkei PF01 17" x 9", +35, 5x100
 

Hey everyone,

I've reached out to Enkei about producing a small run of their PF01 wheel with the following specs for our FR-S and BRZs:

17" x 9"
+35 offset
5x100
Gunmetallic finish

I would like to gauge interest to see if I should continue trying to get this together. Pricing should be in line with the PF01SS wheel that they currenly offer in 17" x 9", +35, 5x114.3.

Please post up if you are interested.

We need 15 sets in total for them to produce these wheels.

Cheers,

Colin

Can you get them to give you a weight and is Gunmetal the only choice?

The weight of the wheel will be the same as the PF01SS in 17" x 9", which is 19.2 lbs.

We have to pick the same colour for all 15 sets. If there is more demand for a different colour, we can change it.

According to the flushness specs posted on the forum, I think a 9" rim is flush at +50 in front and +43 in back. So wouldn't a +35 really stick out?

lower and add a normal amount of neg camber and it will fit perfectly. Freed has a car with 18x9 +38 with 255 and it fits perfectly. 3mm is nothing.

To each his own, I would want 17x8.
Here's a link on sizes currently available.

http://www.enkei.com/pf01.shtml#

Lets get a GB going for some 17x9 +35 RPF1!!!

Here are some pics of a 17" x 9" +30 offset from DarrenDriven's thread:

Spaztastik's car:
http://i31.photobucket.com/albums/c3...5/IMAG0083.jpg
http://i31.photobucket.com/albums/c3...5/IMAG0084.jpg

DarrenDriven's car:
http://i.imgur.com/yCU2x.jpg

I think the 5mm will remove most of the poke that some people didn't like... Keep in mind, both cars are lowered, so the neg. camber is helping to pull the top of the wheel in a bit.

Hope you guys don't mind me using your pics!

Enkei is already planning those... There's a thread about it somewhere. This thread is to gauge interest in getting them to do the PF01s in that size.

been out for a while...

http://www.dezod.com/pd-enkei-rpf11.cfm

reputable shop in the scion tC world

^ They're sold out (have to order in batches) and the price is a little high..

Do we know for sure if the tire rack ones will be 35 offset? I was figuring they'd bring them out as 45.

Should be a great wheel for a great price.

Light, wide and they'll probably look better in a +35 too.

I need the PFO1 in 18x8.5

+42 please!