Aftermarket spoilers/lips that use stock holes?
 

I have a 2017 BRZ with the stock low spoiler. Was wondering if there were any spoilers or lids that use those existing holes so I don't have to try and fill/sand/paint the stock trunk?

I was thinking about getting the Drambeeni (spelling) risers, but I want to know if there are other options out there that don't require the effort of filling/sanding/priming/paint matching.

Thanks in advance!

i believe the standard duckbill spoiler would cover the holes, same as my '14, though some extra research would be needed to double check that.

according to the pictures i'm pulling up, it looks like the uprights are in a similar location at least.

Not quite.


http://www.ft86club.com/forums/showp...9&postcount=37


I have yet to see anything that matches the '17 holes, only options seem to be Drambeenie or Perrin risers. The general opinion I've seen otherwise is go for a trunk swap if you want a different spoiler so you don't have to deal with getting the holes filled.

Thanks for the help!

Actually I found that the only spoiler that covers the holes is the Modellista One. I bought a TRD and will modify it with fiberglass to make it cover the holes. Finding a K3X blue trunk is not easy here...

well, the nur-spec spoiler ought to cover, as well as an oem gt-r, or similar style spoiler. but the styling's not for everyone.

https://i.ebayimg.com/images/g/A-oAA...Wv/s-l1600.jpg

https://i.ebayimg.com/images/g/MvUAA...MW/s-l1600.jpg

https://i.ytimg.com/vi/s_r8KtO_Oy8/hqdefault.jpg