Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   Flowmaster 80 series muffler review!! (https://www.ft86club.com/forums/showthread.php?t=131190)

RedRez86 11-02-2018 05:16 PM

Flowmaster 80 series muffler review!!
 
So I had flow master muffler installed about a week ago. I have VDS overpipe, VDS front pipe, gutted my cat in the header and put in a resonator where the mid pipe used to be along with the 2.5 inch custom piping back to the Flowmaster 80 series muffler. Results? She sounds mean, aggressive purrs like a kitten pops a bit and NO DRONE at any RPM. I read a lot of negative things about Flowmaster but I believe the resonator I added in was key for this sound and taking off the drone. I can’t wait to hear how it sounds with the VDS headers I will be ordering with in the next month or 2! It is not obnoxiously loud to where you can’t hold a conversation in the cabin nor will you wake the neighbors with this kind of setup. When you step on the gas though she sounds exactly how you would like it to. It’s the best of both worlds and I would highly recommend Flowmaster exhaust with a resonator. If you are going with full exhaust as I am. I will upload sound clips soon!


Sent from my iPhone using Tapatalk

SuperTom 11-02-2018 05:27 PM

sounds like a good setup. Just curious when you say you placed a resonator in the midpipe since the stock midpipe already has a resonator

Joveen 11-02-2018 05:27 PM

Quote:

Originally Posted by RedRez86 (Post 3151415)
So I had flow master muffler installed about a week ago. I have VDS overpipe, VDS front pipe, gutted my cat in the header and put in a resonator where the mid pipe used to be along with the 2.5 inch custom piping back to the Flowmaster 80 series muffler. Results? She sounds mean, aggressive purrs like a kitten pops a bit and NO DRONE at any RPM. I read a lot of negative things about Flowmaster but I believe the resonator I added in was key for this sound and taking off the drone. I can’t wait to hear how it sounds with the VDS headers I will be ordering with in the next month or 2! It is not obnoxiously loud to where you can’t hold a conversation in the cabin nor will you wake the neighbors with this kind of setup. When you step on the gas though she sounds exactly how you would like it to. It’s the best of both worlds and I would highly recommend Flowmaster exhaust with a resonator. If you are going with full exhaust as I am. I will upload sound clips soon!


Sent from my iPhone using Tapatalk

Need sound clips bro. Good review.

Sent from my SM-G935T using Tapatalk

RedRez86 11-02-2018 05:40 PM

Quote:

Originally Posted by SuperTom (Post 3151425)
sounds like a good setup. Just curious when you say you placed a resonator in the midpipe since the stock midpipe already has a resonator



So what we noticed was that one side was slightly larger than the other side on each side of the resonator. We cut on the side of thicker piping and put in a resonator half the size (and lighter) than the original and went custome 2.5 from the resonators back. The whole job with resonator and muffler cost me 500 dollars fellas. This is a much cheaper and better sounding option than buying Cathay plus install and still not having the sound we want! So I highly recommend this route for guys who want to budget their exhaust! Also I might add VDS parts can be found on Facebook. They are in Philippines but parts are cheap and quality! Headers they quoted me around 400-450 and they sound SICK! I can’t stress enough how satisfied I am with everything.


Sent from my iPhone using Tapatalk

RedRez86 11-02-2018 05:40 PM

Quote:

Originally Posted by Joveen (Post 3151426)
Need sound clips bro. Good review.

Sent from my SM-G935T using Tapatalk



Will be coming later tonight latest tomorrow!


Sent from my iPhone using Tapatalk

ls1ac 11-02-2018 07:02 PM

FYI


I bought the cat back from them and found the drone VERY bad at cruising speeds (60 to 75). I cut the Flow master and the stock with the resonator and welded them together. It helped a great deal but still have a drone on the interstate. It is inexpensive by comparisons but would not use them again.
I talked to someone in their tech lab and the response was, we used an existing muffler to get to market and we are called American Thunder.


OK Whatever


Perhaps they have changed the muffler in the last five years???

RedRez86 11-02-2018 07:37 PM

Quote:

Originally Posted by ls1ac (Post 3151468)
FYI


I bought the cat back from them and found the drone VERY bad at cruising speeds (60 to 75). I cut the Flow master and the stock with the resonator and welded them together. It helped a great deal but still have a drone on the interstate. It is inexpensive by comparisons but would not use them again.
I talked to someone in their tech lab and the response was, we used an existing muffler to get to market and we are called American Thunder.


OK Whatever


Perhaps they have changed the muffler in the last five years???



Hmmm, maybe they have made slight modifications? I am not sure! Like I said I have a front pipe with VDS (has small resonator) and then put Flowmaster resonator where stock midpipe was and literally zero drone brother. It sounds beautiful.


Sent from my iPhone using Tapatalk

Summerwolf 11-02-2018 07:47 PM

The american thunder catback systems use an 80 series muffler. They have recycled and reused the same casing designs for years.

I am surprised at the claim of "no drone." That's typically not a characteristic of flowmaster.

RedRez86 11-02-2018 08:20 PM

Quote:

Originally Posted by Summerwolf (Post 3151494)
The american thunder catback systems use an 80 series muffler. They have recycled and reused the same casing designs for years.

I am surprised at the claim of "no drone." That's typically not a characteristic of flowmaster.


I don’t know what to tell you guys other than the secret recipe I used to piece it all together lol. I think it’s the 2 resonators honestly and maybe even the VDS piping combination that goes nicely with it? I will let you guys be the judge and post video clips later. Personally I am very satisfied with the sound!



Sent from my iPhone using Tapatalk

Joveen 11-02-2018 09:12 PM

What's the diameter on the VDS exhaust? If its 3" I'll cop it.

Sent from my SM-G935T using Tapatalk

RedRez86 11-02-2018 09:21 PM

It’s only 2.5 inch boss they do not sell 3” piping :/
Although I’ve been told it does not make much difference in our car having 2.5 rather than 3 inch unless you’re going for over 400 hp. I know a guy who runs 350 give or take off 2.5 piping. Sounds and rides nice but it’s you’re car! :)


Sent from my iPhone using Tapatalk

Turdinator 11-02-2018 09:25 PM

Any under car photos so we can see the resonator setup?

RedRez86 11-02-2018 10:19 PM

Quote:

Originally Posted by Turdinator (Post 3151526)
Any under car photos so we can see the resonator setup?



I should have thought about all these things before he took it down from the list! I’m at work I will do my best to take some photos and record a sound clip


Sent from my iPhone using Tapatalk

RedRez86 11-02-2018 11:36 PM

Okay guys here is a 3 minute sound clip of in the cabin with windows up. You can hold a conversation and drive with cruising at 50 to 70 it gets very quiet with great deep tone. At the end of video I roll window down and rev up to 4K couple times then a couple revs all the way up to redline. Let me know what you think or if you need more!


Sent from my iPhone using Tapatalk


All times are GMT -4. The time now is 12:24 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.