SOLD! Full Blown Motorsports Oil Cooler
 

Full Blown Motorsports Oil Cooler

$350 Shipped

Kit is made up of 19 row cooler, lines, Mocal thermostatic plate, and bracket to mount toward passenger's side of the bumper. Lines are 64" and 74" so they reach all the way to the far side of the car. As pictured, there was a minor abrasion to the 64" line, approximately 9" away from where it meets the sandwich adapter. As you can see, it only goes through the nylon covering of the line - it has not damaged the stainless line. Also pictured are the only blemishes to the cooler itself.

https://i.imgur.com/QBpMM8Q.jpg
https://i.imgur.com/pAoHfyh.jpg
https://i.imgur.com/1QWoAdr.jpg
https://i.imgur.com/J0KDBso.jpg
https://i.imgur.com/VyYNyRY.jpg
https://i.imgur.com/wCh0Fbl.jpg
https://i.imgur.com/reo16Q0.jpg
https://i.imgur.com/MD7Ok1s.jpg
https://i.imgur.com/2s5vvy8.jpg
https://i.imgur.com/18raEff.jpg
https://i.imgur.com/ayeYRMr.jpg
https://i.imgur.com/rfjkxSp.jpg

Compatically?
 

If you know, would this cooler be compatical with an Edelbrock S/C kit. Gets crowded up front so I understand.

Did you ever get oil leaks?

I can't say with 100% certainty that it will fit with the Edelbrock, sorry! I haven't run that setup. You can see on Full Blown's website where and how it routes.

This came installed on a car I bought, and I took it off immediately do i can't say if it leaked. However, it is was dry around all of the fittings when I disassembled it, so I don't think it was leaking.