Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Bolt-Ons (https://www.ft86club.com/forums/forumdisplay.php?f=60)
-   -   Sold! Please lock. Full Blown Motorsports Built 9.0:1 Motor + Stage 1 Turbo Kit (https://www.ft86club.com/forums/showthread.php?t=131024)

JonH 10-25-2018 02:26 PM

Sold! Please lock. Full Blown Motorsports Built 9.0:1 Motor + Stage 1 Turbo Kit
 
Up for sale is the following:

Full Blown Motorsports 9.0:1 Short Block (Built 2014)
9.0:1 Arias Pistons (Stock Bore)
FBM Forged Rods
Full Blown Motorsports Stage 2 Head Package (Built 01/15)
Full Blown Motorsports Stage 1 Base Turbo Kit (Installed 08/13)
Precision Turbo Wastegate
TiAL Blow Off Valve
Garrett GTX 3076R Turbo Upgrade (Installed 02/14)
Injector Dynamics ID1000 Injectors
Full Blown Motorsports Cast Oil Pan
Full Blown Motorsports Catch Can Kit with Battery Tie-down (forgot to photograph tie-down)
Full Blown Motorsports 270S Fuel Pump (BNIB, not pictured)
MAC Electronic Boost Control Solenoid
PTP Turbo Blanket

I’d like to keep everything together because it was all built together. This setup came in a car that I bought from my friend who purchased the car new in 2013 and upgraded it incrementally until 2015. The car had 13,700 miles on it when I bought it in June 2018, so many of the parts have fewer miles on them than that. My friend was never happy with the driveability of the tune on cold start or at partial throttle, so he never drove the car much. I am a track junkie and have no need for the kind of power this setup made, so I replaced this setup with a stock motor.

I do have some receipts, but unfortunately not all of them. I am doing my best to represent what I know about the setup, along with what my friend remembers from having built it back in 2013/2014 (he’s had a lot of cars since then). I have taken photos of the forged pistons with a borescope. I tried to sneak the borescope up through the oil drain hole and photograph the rods too, but I couldn’t make it past the upper oil pan and windage tray with the camera. If you are a serious buyer and come with cash in hand, we can remove the oil pan together if you need to see proof of the forged rods. You are also welcome to bring a compression tester - I didn’t have a 14mm spark plug adapter for mine.

Video of cold start on old fuel (E44) (excuse the dust!): https://www.youtube.com/watch?v=iDLIkLX8NJI
Video of revving to redline: https://www.youtube.com/watch?v=khkGraiGsWo

If you have more questions, I’ll do my best to answer them or find out from my friend if he can remember. I’ve tried to be as transparent and comprehensive as possible, hence the borescope photos, videos, and oil photo. Also seen below is a photo of some of the oil that came out of the car when I drained it - no milkyness, no metallic bits. Of course, you’ll need some new gaskets and a few new hose clamps for the charge piping. I’ve also got a box of parts I’m happy to include, such as stock pistons and rods, various parts from previous incarnations of the build, as well as a few high-torque clutch and flywheel setups you’re welcome to have.

$4800 for everything, picked up in Menlo Park (Bay Area), California

Thanks for looking!

Jon

https://i.imgur.com/v6YC5wm.jpg
https://i.imgur.com/eD1s85c.jpg
https://i.imgur.com/4OXdRl3.jpg
https://i.imgur.com/mR9LK6u.jpg
https://i.imgur.com/XJGpwnb.jpg
https://i.imgur.com/rxa5tmI.jpg
https://i.imgur.com/Wwn1FnJ.jpg
https://i.imgur.com/oLOzjCM.jpg
https://i.imgur.com/RwAyWyg.jpg
https://i.imgur.com/dgvsccF.jpg
https://i.imgur.com/OdBKaP8.jpg
https://i.imgur.com/QOcl8hH.jpg
https://i.imgur.com/jFfuPqN.jpg
https://i.imgur.com/52IYqmc.jpg
https://i.imgur.com/HdslzOp.jpg
https://i.imgur.com/vtCf1Vd.jpg
https://i.imgur.com/u84Ffxt.jpg
https://i.imgur.com/CjD51iD.jpg
https://i.imgur.com/VGvx1vJ.jpg
https://i.imgur.com/DZI65Sf.jpg
https://i.imgur.com/NT4mzs2.jpg
https://i.imgur.com/duVEzHM.jpg
https://i.imgur.com/aAYDE13.jpg
https://i.imgur.com/YWfidys.jpg
https://i.imgur.com/vYj0paC.jpg
https://i.imgur.com/vz9aifV.jpg
https://i.imgur.com/XiUcWi0.jpg
https://i.imgur.com/FbgJZON.jpg
https://i.imgur.com/0odeYiS.jpg
https://i.imgur.com/xObkGU4.jpg
https://i.imgur.com/tEemkDd.jpg
https://i.imgur.com/F4DHV6X.jpg
https://i.imgur.com/Pajmi8V.jpg
https://i.imgur.com/wY89hJ9.jpg
https://i.imgur.com/EgdFGbk.jpg
https://i.imgur.com/Ewxb19N.jpg
https://i.imgur.com/NCMwOnD.jpg
https://i.imgur.com/Mwsn7gh.jpg

Thanks again!

Tonrogs 10-26-2018 08:32 AM

I'm interested!
Please pm me your phone number. I would like to talk a bit about this.
Thsnks!

eherschend 10-26-2018 10:47 PM

Interested and in the bay area.

JonH 10-27-2018 08:28 PM

Sale Pending

zmzliang 12-29-2018 01:05 PM

sold?

JonH 12-29-2018 01:25 PM

Whoops! Thought I marked this already Yes, it sold. Sorry about that!


All times are GMT -4. The time now is 08:04 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.