vented BRZ fender trim?!
 

Hi guys I am thinking to start making the BRZ fender trim fake vents to real ones and start selling them is anyone interested in buying them ?

Attachment 171459

If I start selling them the kit will include .
1- FRP unpainted vent trim right and left .
2- template for the cut line on the actual fender .
3- 3M .

let me see your thoughts :popcorn:
:cheers:

https://www.ft86club.com/forums/showthread.php?t=70815


Also..
https://www.nengun.com/prova/fender-vent-emblem


But if you can offer it for cheaper I think you may have a business on your hands.

Will try my best to get the lowest price the higher the demand on this part the lower i can get the price:thumbup:

bump

If you want to be a vendor or sell a service then you should contact the mods so you don’t get banned for possibly violating the forum rules.

Offering a DIY kit that includes the vent mesh, adhesive, and cutting template with instructions for less than 60.00 might capture a nice market.

I absolutely love my GT mesh from customcargrills.com.

The amount of heat that pours out of these small vents will surprise you too. Would definitely consider these a smart option if boosted.

http://i.imgur.com/iCkbayB.jpg
http://i.imgur.com/rySCR2z.jpg

Still doing this?

Sent from my SM-N960U using Tapatalk

I was looking at my 16 BRZ, seems like I would need to cut metal to vent through the fender garnish. I am wondering about cutting some metal out in between the clips and then trying to slot or putt small pin holes in the black area of the garnish. If it looks like crap then I have to cut more out and put in some grill material. What do you think? Crazy, stupid, not worth it for minimal heat loss?

Seen this?


https://www.ft86club.com/forums/showthread.php?t=70815

Thanks. I’ll wait to see if someone tests that it actually lowers the temps. Not sure I am ready to cut it up yet, but thinking about it.

I'm making these. I'm gonna see about putting some kind of thermometer in the hood near the area and do a before and after. Not sure if someone has a suggestion of a more scientific way lol

Sent from my SM-G960U using Tapatalk

My temp probe is not long enough, but it would be best to take temp measurements at different places in the engine bay. Before and after.

I’m interested in the mesh kit!

Interested as well, though in less apt to be cutting the metal behind it unless the cooling benefits are significant