Mach V Springs for BRZ
 

Our car on our new Mach V lowering springs.

http://i6.photobucket.com/albums/y24...rings/6107.jpg

http://i6.photobucket.com/albums/y24...rings/6041.jpg

http://i6.photobucket.com/albums/y24...rings/6167.jpg

http://i6.photobucket.com/albums/y24...rings/6233.jpg

http://i6.photobucket.com/albums/y24...rings/6065.jpg

Spring rates are increased from stock 28% in the front, 30% in the rear. Lowering is about 0.75" front, 1.0" rear.

--Dan
Mach V
FastWRX.com

Wicked! Any comparison shots OEM vs mach 5? Of just the springs

Never seen lower rear numbers before. What's the stock height difference between the two?

That looks so sweet!!! Any alignment adjustments and if so what products did you use? Also have you noticed any rubbing with it now lowered and running the Awesomes with the 255s?

I'm not sure exactly how to answer that question.

We put OEM Subaru camber bolts in the front. It still doesn't have any front camber; we will probably do some aftermarket top hats to increase it.

No.

Not exactly the same angle, but you get some idea. Before and after:

http://i6.photobucket.com/albums/y24...reandafter.jpg

Just the springs:

http://i6.photobucket.com/albums/y24...ingsstudio.jpg

--Dan
Mach V

Would you do any discount for rims, tires and springs package? PM me if you'd like. This is the perfect package for track setup!

We don't sell tires, but if you are local to us we can install them. (We're a Tire Rack Recommended Installer.) Otherwise, just buy the springs and wheels, and get your tires installed by your local tire installer.

--Dan
Mach V

Hey, local customers who came by and bought springs...come back so we can take some pics of your cars!

--Dan
Mach V

Now in stock!

http://i6.photobucket.com/albums/y24...s/BRZ/7072.jpg

--Dan
Mach V