TE37 SAGA FITMENT
 

So i got my buddy to order rims only and he made a mistake by ordering a staggered set of TE37 sagas. 18x8.5 et45 and 18x9.5 et 43. i decided to go with them anyway, Question is i want to front to have the more "flush" look so i'm opting for spacers. looking at the 3mm ones but a PITA to find them here in the PH. so should i just go with 5mm? is there a big difference? and should i put 5mm spacers on the rears too or is the offset 43 good enough. THANKYOU THANKYOU for everyone who'll reply.

I don't think you'll need any spacers at all, to be honest.

At +45? really?

Yes, they will fit without rubbing. Though without coils, adding camber will bring you close to the spring perch, possibly touching, in the front.


To be as flush as my setup, you would have to add a 20mm spacer in the front.

Your rear will be sunk in 5mm compared to my car.



18x8 +19 -1.5 camber 215/40/18
https://www.ft86club.com/forums/pict...ictureid=11407

18x9 +32 -2.2 camber 245/35/18
https://www.ft86club.com/forums/pict...ictureid=11406

I'll be installing the KWv3 before the rims arrive anyway. Thanks bro!!

I don't think many people will notice 3mm.

Also it depends how much you're lowered and how much camber you're running.