Radio, dome light, clock won’t work
 

So I recently put in a new motor into my car and check to make sure everything is plugged in now my radio is not working the time is not showing and some light now working now I search alll the fuses to new one stil didn’t work and I checked the fuse slot to see if they were getting power and they were now what could it be tbh.

Did you check both sets of fuses? The ones under the dash and the ones in the engine bay?

Judging by your recent engine swap, make sure your wiring harness is properly installed and grounded for both the interior and exterior fuse blocks.

The Radio and clock are both fuse protected by the same fuses on the engine bay box and interior box:

On the engine bay fuse box it's fuse 49 which is also dome light and needs to be replaced with a 20 amp fuse:

http://www.autogenius.info/wp-conten...ompartment.jpg


It can also be the interior illumination fuse on the inside fuse box:
http://www.autogenius.info/wp-conten...ment-panel.jpg

That'll be fuse 3, which is 10 amps, and fuse 17 and 21 which are 7.5 amps

Sorry for taking a while to respond but I’m check tomorrow and see what happens thank you I’ll keep you guys updated

Yes I swapped all the fuses for new one so maybe just a faulty fuse maybe idk

OP, for you and others that find this thread, and for as long as the website remains active, First Gen. Electrical Wiring Diagram.

So, does stuff work now ??


:bellyroll: you didn't need to swap ALL the fuses, just the one(s) that were blown.

(Bubba learnt me that)

:D


humfrz

Love this forum. Thanks for all the info! Fixed my issue easy.