Alignment
 

I got my alignment today and was wondering if the numbers are okay with being a little off? Don't know too much about it it's supposed to be. I have 245/40/17 wheels and am on trd springs but it looks like they used stock wheel specs. Frs masters of the forum shed some light onto my noob ass , should I have gone back to make everything the same? Thanks

https://uploads.tapatalk-cdn.com/201...5612710b77.jpg




Sent from my iPhone using Tapatalk

Since camber isn't adjustable on the car, ideally, I would go with 0 Toe in the front and slight toe in for the rear. But you have toe in for both. If I can recall, Toe In allows stability for highspeeds and toe out increases turn in. But for daily driving, I think your toe is fine.

looks pretty good, you should have added camber bolts in the front.

Dope thanks guys! I was just a little worried but it sounds like it's good. Since the numbers were way off before I'll probably do a canyon run to notice any difference


Sent from my iPhone using Tapatalk

The only thing that was off was the toe.
I say they did a great job only to be 1 degree different.