projek_01's Audio Build
 

Hi guys,

Just wanted to show off the progress in my audio build.

Here is what I am looking to run
Head unit
Pioneer AppRadio 3 - Want the new 4400NEX wireless Android Auto unit when I have some cash

Processor
Rockford Fosgate DSR1

Amps
Rockford Fosgate 4 Channel PBR300X4 Driving rear fill and front dash tweeter
Rockford Fosgate 2 Channel PBR300X2 Driving midbass in doors
Focal FD 1.350 1 Channel Mono

Speakers
Front Speakers - Focal PS165 Components - Likely running active crossover with the DSP
Rear Fill - Stock for now, TBD
Sub - JL Audio 10TW1 2OHM

Front mid bass mounted in 3D printed adaptors inspired by @Shankenstein thread.
http://img.photobucket.com/albums/v3...psd7cdo6ex.jpg

Wired in with XT60 RC car connector for quick removal and clean install.
http://img.photobucket.com/albums/v3...psr1lybuq0.jpg
http://img.photobucket.com/albums/v3...pscsfppvop.jpg

Working on little baskets to hold the tweeters in the dash location
http://img.photobucket.com/albums/v3...psqndl4l9m.jpg

Also working on plug and plug connectors so I do not have to splice any of the factory tweeter wiring.
http://img.photobucket.com/albums/v3...s3wtczis1.jpeg

Thanks to @RandomHero, I can power the midbass and tweeters off of the wiring in the trunk without pulling new wires.

Thats all I have for now. I am currently working on sound deadening both the front doors with Noico 80 mil dampener and Noico closed cell foam. More on that later.

Can't go wrong with Focal!