Rear Endlink Bolt
 

Hey guys! I recently installed coilovers on my car. Unfortunately I lost the rear endlink bolt :cry: I found the part number which is 901000360. Does anyone know the bolt size of this part? I am trying to go to my local hardware store instead of traveling a bit to my Subaru dealer for just a bolt. Thanks!

I think it’s a 14mm socket that’s used so just see what head size the 14 slips over (m10,11 or 22)

Yup 14mm for bolt and nuts. Installed the Perrin swaybar earlier today and had to take off those sway link off the lca.

I think it's an M10x80mm flanged bolt. Don't know what grade it is though.

Bolts from the hardware store that get used on the suspension should be grade 8

Be careful with that. A metric Grade 10.9 will be roughly equivalent to US Grade 8.

Here’s what I got today, one of the oem bolt was stripped and I had to run to Home Depot to get a temporary replacement. The bolt size is. 3/8 and about 3” long.

I was in a hurry and got the 3/8x4” one and yes it’s 1” longer, but it’ll be temporary as my Perrin fixed sway link will be here Thursday that includes some new bolts n nuts.

The Hope depot one using the same 14mm head as oem.

Thanks guys. You guys are amazing! Appreciate all of the responses