Where can I buy STI Black alloy wheel 17x7.5 for BRZ PP?
 

I am looking to purchase STI Black alloy wheels for my 2018 BRZ performance package.
They should be 17x7.5 to clear the brembo brakes.
Does anyone know where to purchase this wheel?
Please see below link for your reference.

http://www.ft86club.com/forums/showp...4&postcount=75

Maybe try the Tire and Wheel board?

http://www.ft86club.com/forums/forumdisplay.php?f=24

I'm pretty sure that the 17x7.5 were JDM only. If that's the case my best guess is JapanParts.

https://www.japanparts.com/parts/detail/40551

Best alternatives I can find that look very similar are Ambit RE02's on the ultra cheap end and Enkei RS05RR's on the more expensive end.

As answered in the other thread you started about this... They won't fit. The only Subaru OE wheels that will fit the car are the standard PP wheels, the black versions of those that came on the Series.Yellow, and the 18" STI wheels from the tS.

Not trying to post misleading information but please check this out:
http://www.ft86club.com/forums/showp...4&postcount=75
It looks like he actually fit those 17x7,5s without issues.
Also japanparts.com states that it should clear "TS 4POT Brembo"
https://www.japanparts.com/parts/detail/40551

According to the factory's website they didn't fit the old JDM optional STI branded black Brembos but they will fit the new BRZ PP OEM branded red Brembos.

Buy from Japanparts as I've bought two sets of these 17x7.5J +48 from them over the years. One set comes to $2600 CAD shipped and dutied via FedEx.

Will the BRZ Performance Package Wheels (10 spoke) fit a 2014 FRS (clearance with the brake)?

BRZ Performance Package breaks are bigger than the FRS brakes, so you'll be fine for caliper clearance.

Subaru parts counter would be a safe bet.

Will putting these on without spacers cause the wheels to be too inward?

Does anyone have 2017 brz with performance package?
 

Im looking for someone who has 2017 brz with percormance package that comes with black alloy wheels.

Too inward for what? Visually? Hitting suspension parts?

The suspension arms, knuckles, etc are all the same on the FRS and BRZ PP, so there's zero risk of it rubbing on anything.

If you're worried about the visuals, it'll look exactly the same on the FRS as it does on the BRZ PP. I don't know the offset of the wheels you're looking at off the top of my head, but I don't think Subaru would run even higher offset than the stock base wheels.

Dude..... You can get your questions answered in one thread. You don't need three of them. What questions do you have?

These wheels fit:

Series.Yellow 17x7.5" wheels
http://www.autoguide.com/blog/wp-con...-Review-14.jpg

BRZ tS wheels 18x8"
https://s.aolcdn.com/hss/storage/mid...-brz-ts-fd.jpg

These wheels do NOT fit:

STI wheels for BRZ 17x7"
http://www.canadianautoreview.ca/ima...ora-wheels.JPG

Do you need to start a 4th thread with another question?

Also, in case you keep making posts here because you think they're being deleted, they're just being moved to the wheel/tire forum.