2017 GR edition cluster mod
 

Does anybody know whether the 2017 GR edition cluster mod is applicable to 2012-2016 model??

Issue is the extra display on the right side.

So, you have to sell it to me... :-)

This has already been installed in a 2013 model in Hong Kong and is working just fine!
I am waiting for some further info from the guy that installed it, if any further mods are needed so that to get full display on the right screen - same as 2017 model!
However nothing received yet. Just waiting :sigh:
In the meantime, I have addressed my request to Gazoo Racing, as well.
Lets see what they will also tell me..

My biggest question is WHERE to I purchase this at?!

I’m also looking at swapping the cluster on my 2017 to the similar one found in the 2018 models. It’s also found on the 2017 860 edition. Have parts numbers for the steering wheel additional controls and the cluster itself. I understand It will need to be programmed. But waiting on confirmation on wether or no it will work on key models as supposed to just push-start models.

Any idea if the faceplate (basically the analog gauges and white piece) can be swapped to a 2017 and reuse the original screen/system?

If you mean if the cluster is reading just from regular obd it is not the case. Not all the sensors are from ECU. There are some sensors that they were added just for the gauge, but I am not aware of the details.

Amazon Japan

Part number? Link?

Anybody know what goes into a clutter swap on our cars? Guessing it would require programing at the dealership rather than plug and play?

I would think it would be as simple as plug and play, but I have a hunch it wouldn't be. I would also like to know about this.

Just giving yall an update. I did some looking through the frs and 86 service manual and it *looks* like when installing a new, unprogrammed cluster, the only required after hooking it up is getting the key programmed. From a different thread, you can even drive with the cluster unplugged but I have no clue if plugging in an unprogrammed one then driving to get it programmed would work or not. So yes, plug and play for the most part it seems but don't take my work for it