Stock intake box bracket
 

Hi All,

First of all i'm new to the 86 world, picked up my 2013 FR-S about a few weeks ago. I noticed that my intake was wobbling a lot. The previous owner of the car seem to have replaced the intake, but did not do a good job of putting the stock one back on. I did some research and saw that there is another mount on the bottom of the intake box, which my car does not have. Where can I get the bracket piece for this? I looked on the Toyota parts and was not able to find the part number for it, along with the screw. May someone please help me? Sorry if I did not do a good job of searching for previous article with this issues.

https://preview.ibb.co/dprwqH/20180318_134050.jpg

If all else fails, people regularly sell the stock instake box for dirt cheap!

Good idea, but wouldn't some aftermarket intakes use that bracket, making the stock one it replaces possibly not come with it?

Is it 46031 here? (46032CA000)
https://parts.subaru.com/a/Subaru_20...10-070-02.html

Thank you both, I was thinking the same. I wanted to purchase an aftermarket intake since my box us cracked. But majority of the aftermarket one uses that one piece too.

Probably going to need the two bolts as well at the least. From the picture, it almost looks like the tab on the airbox is missing too. If it is, OP is going to need that.

Yeah needs the bolts too I think. Hard to say about the tab from the photo provided, it may be under the circle that was drawn on the picture or otherwise obscured. Looks like the tab is molded into the piece and couldn't be replaced on it's own, would need to replace the entire casing if that tab is broken off. Rather, just the front portion of the casing. Still not just the tab on its own though.

Yeah, that's what I meant lol. :bonk: Thanks for clarifying.

Thank you all so much! this made my day!

You are the bomb!