Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   2017 manual model axleback exhaust options (https://www.ft86club.com/forums/showthread.php?t=125767)

Jasonb 03-01-2018 09:18 PM

2017 manual model axleback exhaust options
 
So the 2017 and 2018 with the manual transmissions use a different axleback. What choices are there for 2017 axlebacks? Not looking to spend Nameless performance or Borla kind of prices. And I don’t want just a muffler delete, I want some type of muffler. Want a nice deep sound, but don’t want to be crazy loud.

monkeybike 03-01-2018 09:26 PM

HKS do a specific ‘17-on axleback now.

Jasonb 03-01-2018 09:35 PM

I really want to try this https://shop.namelessperformance.com...pipe-brz-fr-s/ but am afraid it’ll be too loud. How loud will it be with a JDL UEL and otherwise stock exhaust? My OFT tune has the obnoxious cold start disabled so that’ll help there.

Jasonb 03-01-2018 10:43 PM

I actually just bit the bullet and ordered that nameless muffled single exit. Hopefully it's not too loud. Is there a right side outlet cover for my bumper available from anywhere?

Ricepuddin 03-01-2018 11:33 PM

Quote:

Originally Posted by Jasonb (Post 3052042)
I actually just bit the bullet and ordered that nameless muffled single exit. Hopefully it's not too loud. Is there a right side outlet cover for my bumper available from anywhere?

I have it on mine, I love it but I don't have headers. No block off for my17 and up yet

Sent from my Pixel XL using Tapatalk

Jasonb 03-02-2018 12:31 AM

Quote:

Originally Posted by Ricepuddin (Post 3052063)
I have it on mine, I love it but I don't have headers. No block off for my17 and up yet

Sent from my Pixel XL using Tapatalk

You’re exhaust is otherwise stock? I’ve seen at least one person use the block off that ft86speedfactory says doesn’t fit. I sent them an email asking about it, if they have no answer I might make the one they sell fit anyway.

Ricepuddin 03-02-2018 01:44 AM

Quote:

Originally Posted by Jasonb (Post 3052098)
You’re exhaust is otherwise stock? I’ve seen at least one person use the block off that ft86speedfactory says doesn’t fit. I sent them an email asking about it, if they have no answer I might make the one they sell fit anyway.

Yep stock, this is the first thing I've done thus far. Let me know what you find out regarding the cutout because I am not about that shippinghttps://uploads.tapatalk-cdn.com/201...b83a4d9ab6.jpg

Sent from my Pixel XL using Tapatalk

Jasonb 03-02-2018 10:39 AM

Quote:

Originally Posted by Ricepuddin (Post 3052132)
Yep stock, this is the first thing I've done thus far. Let me know what you find out regarding the cutout because I am not about that shippinghttps://uploads.tapatalk-cdn.com/201...b83a4d9ab6.jpg

Sent from my Pixel XL using Tapatalk

That’s gotta be a mistake. It only should weight a few ounces.

Ricepuddin 03-02-2018 12:13 PM

Quote:

Originally Posted by Jasonb (Post 3052244)
That’s gotta be a mistake. It only should weight a few ounces.

Nope, shipping to Hawaii is stupid

Sent from my Pixel XL using Tapatalk

Xxyion 03-02-2018 01:28 PM

I'm a huge fan of Nameless. Honestly you can find them used for pretty cheap. I owned the 3" with 5" mufflers which i got used for 400$. And later on i switched to the 2.5" with 5" mufflers which i picked up for 300$. Best exhaust note in my opinion. Especially paired with UEL headers.

Jasonb 03-02-2018 01:41 PM

Quote:

Originally Posted by Xxyion (Post 3052336)
I'm a huge fan of Nameless. Honestly you can find them used for pretty cheap. I owned the 3" with 5" mufflers which i got used for 400$. And later on i switched to the 2.5" with 5" mufflers which i picked up for 300$. Best exhaust note in my opinion. Especially paired with UEL headers.

It’s hard to find used stuff that works with the 2017’s. They haven’t been out long enough for many people to have used stuff yet.

Elliotw 03-02-2018 02:22 PM

Just bought 3" inlet with mufflers nameless axleback for my MY17. I'll post up some stuff in my journal once I get it installed.

Jasonb 03-06-2018 09:08 PM

Got it installed. It is a bit loud, but sounds very nice in my opinion.

sirsol66 03-06-2018 10:49 PM

I have the MRT on mine. Very happy with it.

http://www.ft86club.com/forums/showthread.php?t=119867


All times are GMT -4. The time now is 12:55 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.