Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - Bilstein B8|RCE Tarmac Springs|Racer-X LCA|More

All prices include shipping to the continental US. Contact me for shipping to other areas. Call or text for faster response: nine-one-seven-eight-three-six-seven-two-five-zero. Thanks for looking!

1. *SOLD* -- thanks James! Bilstein B8 shocks & RCE Tarmac springs. Used for approximately 18 months/15,000 miles. There is a little rust on surface of springs and at edge of spring perch on front shocks where my 245 tires rubbed them. Has not affected functionality. Just took these off the car and they worked fine up until I took them off. $550 shipped for B8s, $150 shipped for RCE springs.

2. *SOLD* -- thanks Kestrel! Racer-X rear LCA. BNIB. These are the version that allow +1 to -4 degrees of camber. Only reason I'm selling these is that they are not STX legal due to their spherical bearings. I thought I could get urethane bushings for them, but I haven't been able to. A shame, because I like these much more than the STX legal LCAs I have on the car. $375 shipped.

3. *SOLD* -- thanks Kestrel! Racer-X rear swaybar endlinks. I test fit one of them but decided I don't need them with the amount that my car is lowered. $55 shipped.

4. *SOLD* -- thanks Kestrel! Racer-X tie rod ends. These are necessary if you have adjustable front LCAs. They're a nice addition even if you don't have adjustable front LCAs, if you want sharper steering feel and some bump steer correction. Used for approx. 18 months/15,000 miles. Never gave me a problem. $125 shipped.

5. *Endlinks SOLD; Swaybar still available* -- thanks akidnamedguiza! Hotchkis 25 mm hollow front swaybar and endlinks. Used for one TnT and about a week of driving. Too stiff for me. $120 shipped for swaybar, $60 shipped for endlinks; $160 shipped for both.

6. Whiteline KCA326 rear upper control arm eccentric bushing. BNIB. These allow for camber adjustment and roll center correction at the upper arm. Decided not to bother installing these. $70 shipped.

7. *SOLD* -- thank you Michael! Longacre 78290 digital caster camber gauge. Used this only a few times when I was feeling ambitious and did my own alignment. $125 shipped.