Enkei GTC01RR 18x9.5 +35
 

Enkei GTC01RR in Matte Gunmetal 18x9.5 +35 wrapped in Bridgestone Potenza RE760 in 255/35/18 all around.

I have stock TRD suspension on my rs 1.0 (1" drop i believe), and to my surprise I was able to just slap on the wheels without any modification to my suspension!
https://scontent-lax3-1.xx.fbcdn.net...67&oe=5B177617
https://scontent-lax3-1.xx.fbcdn.net...fe&oe=5B14F8D7
https://scontent-lax3-1.xx.fbcdn.net...41&oe=5B25DE5Fhttps://scontent-lax3-1.xx.fbcdn.net...42&oe=5B1447A6
https://scontent-lax3-1.xx.fbcdn.net...65&oe=5B1579B0
https://scontent-lax3-1.xx.fbcdn.net...36&oe=5B145FA7
https://scontent-lax3-1.xx.fbcdn.net...f2&oe=5B21356A

What is your alignment like?

I see more camber in the rear than the front, I imagine some camber or crash bolts in the front and aligned you'll gain some front end camber and she should turn in like a champ.

I haven’t noticed anything too off putting?
I’m about to install some Tein flex A’s today so hopefully that remedies the front end? I’ll post some more pics after the install

They have camber plates so after an alignment you'll be able to dial them in perfectly.

Wow, that looks / fits great man! Not sure why the GTC01RR isnt more of a popular wheel!

Thank you! I agree!

Just finished installing my coil overs for a 2 inch drop. A very tight 1 finger gap
Will get an alignment then Take more pics lol

dropped about 2" on some tein flex a's

https://scontent-lax3-2.xx.fbcdn.net...d6&oe=5AC5A352
https://scontent-lax3-2.xx.fbcdn.net...5d&oe=5AC59520