Changing Wipers: Stock to Aftermarket
 

To change your stock wiper blades to aftermarket ones:

Pull up your stock wiper (obviously)
http://i217.photobucket.com/albums/c...229_111722.jpg

With a lever, or even with your long fingernail, pop up the hood-type clip at the joint where the wiper arm & the wiper blade meet
http://i217.photobucket.com/albums/c...229_111815.jpg
http://i217.photobucket.com/albums/c...229_111832.jpg

Pull the wiper blade down
http://i217.photobucket.com/albums/c...229_111914.jpg


Although aftermarket wiper blades usually come with several adaptors, you usually don't need one for your FRS/BRZ/86.
http://i217.photobucket.com/albums/c...229_111929.jpg

Just slide it up till you hear a click sound
http://i217.photobucket.com/albums/c...229_111947.jpg
http://i217.photobucket.com/albums/c...229_112011.jpg

This is adorable. Welcome!

I know right?

OP join date.
Nov 2012.

Lurker for 5 years

First post is a DIY.
With photos!

Subaru also sells the insert to go back into your stock low profile wiper. .... cough. If you like that lowness.


Sent from my iPhone using Tapatalk