Originally Posted by SGTPanda (Post 3015777)

Thanks for the input guys but those are all toyotas lips. I'm looking for lips that fit the MY17+ BRZ.

Originally Posted by VerusEric (Post 3016051)

Our splitter bolts up to 2017+ BRZ and GT86 bumpers, no problem :).

https://static.wixstatic.com/media/b...6093a0~mv2.jpg

https://static.wixstatic.com/media/b...4a9dc2~mv2.jpg

https://static.wixstatic.com/media/b...2f1511~mv2.jpg

Thanks,
Eric

Originally Posted by VerusEric (Post 3016051)

Our splitter bolts up to 2017+ BRZ and GT86 bumpers, no problem :).

https://static.wixstatic.com/media/b...6093a0~mv2.jpg

https://static.wixstatic.com/media/b...4a9dc2~mv2.jpg

https://static.wixstatic.com/media/b...2f1511~mv2.jpg

Thanks,
Eric

Originally Posted by derekbrz24 (Post 3019608)

What rear spats are on the car?

Originally Posted by VerusEric (Post 3016051)

Our splitter bolts up to 2017+ BRZ and GT86 bumpers, no problem :).

https://static.wixstatic.com/media/b...6093a0~mv2.jpg

https://static.wixstatic.com/media/b...4a9dc2~mv2.jpg

https://static.wixstatic.com/media/b...2f1511~mv2.jpg

Thanks,
Eric

Originally Posted by derekbrz24 (Post 3019608)

What rear spats are on the car?

Originally Posted by Brink (Post 3019654)

Can you confirm your splitter requires the support rods to be installed on a 2017 BRZ? Yours was a product I liked the looks of (particularly with the added endplates), and I liked for previous model years that there was the option of installing without support rods for <90 MPH, or with rods for greater speeds. It seems due to changes to the front end of the 2017 model year the mounting points now require the support rods for all installations. Is this true? I don't like the idea of drilling into the front crash beam to install this if that is the case, so I'll probably end up going in a different direction. Right now the APR front air dam (and other aero kit) is at the top of my list but I'm waiting a bit longer to see if anything else becomes available since there isn't much for 2017+ yet.

Originally Posted by TachyonBomb (Post 3016011)

Welcome to my hell!

The only companies with 2017+ lips are:

APR
Chargespeed
STI and STI reproductions
AIMGAIN (The lip will look weird alone, needs the accompanying front bumper (side burn) wide body extensions)

*VIS Racing said they are looking to make a 17+ brz lip in the future.

*I think the URAS front lip may be able to fit the 2017+ brz. But someone should test fit this just to confirm.

Companies that have made 2017+ 86 lips:

Rallybacker
Greddy
Chargespeed
Stance Nation x Aimgain collaboration
TRD (Looks bad ass if you get the LED lights option)
Grazio
Modellista
Garage Vary
VIS Racing
Battle Aero
C-West
Silk Blaze
TOM'S

Seibon is currently working on an 86 lip



The 2017+ BRZ are getting shafted pretty hard when it comes to things specific to just the 2017+BRZ.
IE:
- Front fog/led lighting options
- Lips
- Bumper mustache options
- Canards
- Fog light bezel options
- Brake options which explicitly state (For Performance Package/Brembo)
- Brake options that cater to the factory brembos
- Wing/Trunk-lip options which work with the limited models wing mounting -
- points or modify the existing wing
- Springs that where created using the SACHS dampers
- Things that revolve around the changes made with the intake manifold (oil cooler sandwich line connections, intakes, throttle bodies) **Should be noted that this last area is getting worked on faster than the others**

Things which overlap both the 2017+ BRZ and 2017+ 86 get pushed out a bit quicker.

IE:
- Axleback exhausts
- Head/Tail Lights
- Tuning updates
- Supercharger/Turbo options
- Front Splitters
- Interior trim (Fingers crossed for a carbon fiber 2017+ steering wheel)

Though it should be noted that the BRZ/86 model updates have only been around for a little over a year while the older models have been around for about 6 years now.