Getting Shredical with the FR-S
 

Figured I'd throw up a journal to log the mods and history of the second twin I've come to own.
estorm, but didn't want the curse of the po po that follows red cars around :paddle:

Came with a TRD catback and factory center console armrest that were added by original owner.

https://i.imgur.com/etlYxvj.jpg

Cool build. Got any more photos of your laminova cooler? Really interested in this setup. Is it custom or a ready to purchase kit?

Here's another from the bottom

Psi at cold start

Installed

F
First impression is, its a big step up from stock. Still fine tuning the gain and xover frequencies in the amp.:party0030:

How secure is that laminova hanging off the coolant hose? Did you have to make a bracket to secure it or should it be fine being held in like that?

An additional update: I had to remove it and reinstall when I put in a new Koyo Radiator.

Some more updates to the car that I got done this summer:

replaced my 1996 Outback with this as my winter beater. :D

Love what you're doing with the FRS. LOVE the new winter beater too! :happyanim:

Hadn't updated the thread. Over the past few months made more mods.

Is there any chance you could provide better photos of how the full race shield is mounted? I bought it, but it came with no mounting hardware, so I'm going to need to figure something out.

Sick build!

Thanks,

I used these spacers and just get the appropriate Hex nut to secure it.

https://www.mcmaster.com/90009A223/

You'll need to cut holes for them to line up to the block. Might also need to trim the plate in a few places with a dremel.