Turn signal stuck on
 

So i have a 2015 FRS and changed bumper to a BRZ bumper and that's kind of when my issues started (before bumper changed i placed my side markers and all that would happen is my turn signal would be fast) I am having issues with my turn signal, my left turn indicator inside my dash stays on/lit and also my actual outside tail light stays on.

I do have Side markers and after market taillights. What could be the problem?

So before on FRS bumper I had turn indicators and now with brz I don't since I placed cleib canards on. A shop did the install and was working fine and the about a week later this happen.

Any help would be great.

Are the blinkers on and stay on as soon as you start the car? Cause it sounds like it's wired incorrectly and the have used the headlights park/drl wire to power the indicators

Only when turn lights on or hit my brakes. If don’t hit brakes or tune lights on it functions fine

I would check the after market tails.

Oh you mean you tail lights indicator? It sounds like you need to repin the tail lights as you brake/indicator wires are switched around. I think, bit hard to understand.

I agree with Tcoat and LED86, check the aftermarket tail lights. Search Youtube for DIY/Installation videos of whichever you have as some installs require splicing certain wires or moving them to different pins.

I dunno how any of you guys have even begun to be able to interpret what this guy's saying.

Some friendly advice, take the time to make sure your post is at least 90% understandable before asking for help.

Hey, Cole, let's cut the guy some slack ........ he's from Chicago ........ it's a wonder he can type at all ........ :confused0068:



humfrz

I'm fluent in gibberish.

Sent from my Pixel using Tapatalk

I haven't heard that term in quite a while ....... :D

OK, you may translate for ol Cole ....... ;)


humfrz

Shortly after installing my TOM's tail lights one of them would randomly get stuck on, even after turning off the car. I would have to pull the fuse to get them to turn off.

Like this

To fix it I bought a Tapturn relay and haven't had an issue in the last few years.

Did you check the blinker fluid? If the blinker fluid is low, it causes all kinds of issues.

:slap: ......... the blinker fluid system is sealed ....... it can't be low ....... :rolleyes:


humfrz