Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Suspension | Chassis | Brakes -- Sponsored by 949 Racing (https://www.ft86club.com/forums/forumdisplay.php?f=59)
-   -   Cusco Zero 3s on the car (https://www.ft86club.com/forums/showthread.php?t=12208)

Spaztastik 07-20-2012 01:44 AM
Cusco Zero 3s on the car
 
Finally got offa my @$$ and installed my coilovers. Cusco Zero 3s's set to max low (I cant help it I need to seek counciling or somethin).

http://i31.photobucket.com/albums/c3...5/IMAG0080.jpg

http://i31.photobucket.com/albums/c3...5/IMAG0081.jpg



And here they are in there beautyness before I took the collars all the way down

http://i31.photobucket.com/albums/c3...5/IMAG0078.jpg

http://i31.photobucket.com/albums/c3...5/IMAG0077.jpg

86_ZN6 07-20-2012 01:46 AM
i like your wheel and tire setup.

what are the specs?

ImAwesome 07-20-2012 01:46 AM
that sits high for being all the way down

Spaztastik 07-20-2012 01:52 AM
Quote:
Originally Posted by ImAwesome (Post 327309)
that sits high for being all the way down
Yeah thats what I was thinkin, but it might just keep me outta trouble, and looks much lower in person. My camera skills suck :)

Spaztastik 07-20-2012 01:53 AM
Quote:
Originally Posted by 86_ZN6 (Post 327308)
i like your wheel and tire setup.

what are the specs?
Rota Torques. 17x9 e30 with Dunlop dz101's 215/45r17

ImAwesome 07-20-2012 01:55 AM
also assuming thats right after you set it down it will probably settle quite a bit

Spaztastik 07-20-2012 02:43 AM
Quote:
Originally Posted by ImAwesome (Post 327326)
also assuming thats right after you set it down it will probably settle quite a bit
*fingers crossed*

imravenit 07-20-2012 02:48 AM
Whats the offset?

staycrushing 07-20-2012 02:59 AM
im not hating whatsoever... but on a new car, why would you spend 2600 on coilovers... get great drift tires and then get a cheap set of wheels?

for 1500 you can get some forgestars
around the same price some enkei rpf1 (sometimes cheaper)
a couple hundred more than that and your in weds, work and advan territory.

to each his own but unless it was a missile i wouldnt run rotas or xxr's.

Spaztastik 07-20-2012 03:34 AM
Quote:
Originally Posted by staycrushing (Post 327454)
im not hating whatsoever... but on a new car, why would you spend 2600 on coilovers... get great drift tires and then get a cheap set of wheels?

for 1500 you can get some forgestars
around the same price some enkei rpf1 (sometimes cheaper)
a couple hundred more than that and your in weds, work and advan territory.

to each his own but unless it was a missile i wouldnt run rotas or xxr's.
The Rotas are actually gonna be my drift spares, still waitin on the Works to show up :)

Spaztastik 07-20-2012 03:35 AM
Quote:
Originally Posted by imravenit (Post 327432)
Whats the offset?
17x9 +30, gonna be runnin 17x9 +28 when the new wheels show up

HATED1 07-20-2012 04:34 AM
i like your style, can we be friends?

ExoticAir 07-25-2012 05:44 AM
what is your review on the Cusco coilovers..?

DR1FT 08-01-2012 10:38 PM
Quote:
Originally Posted by staycrushing (Post 327454)
im not hating whatsoever... but on a new car, why would you spend 2600 on coilovers... get great drift tires and then get a cheap set of wheels?

for 1500 you can get some forgestars
around the same price some enkei rpf1 (sometimes cheaper)
a couple hundred more than that and your in weds, work and advan territory.

to each his own but unless it was a missile i wouldnt run rotas or xxr's.
cheap is not the word for rota's, I would call them inexpensive. I think cheap means bad quality and low price. I've ran Volks, advans and rota's on my previous rides. I had the rota's in my wrx for 6 years and it never gave me any problems. mean while my ce28's got bent from hitting a small pothole. so go figure??


All times are GMT -4. The time now is 11:15 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.