You feel like you got increased stopping power with this setup?
Might be something for me to try once I destroy my stock pads.

Definitely a huge increase in stopping power once they get some heat into them. I would not recommend the pads for street use though, the first time I drove out to the track in them the squeaking was unbearable. I've since started swapping the pads/wheels/tires at the track the morning of. Once you get through a couple corners and put some heat into them, they're silent.

For a street use pad, the G-Loc GS1 is my go-to, and the R10s get swapped in for track.

Haven't updated this in awhile. But cars been changing.
I've done about 200 laps so far at the local tracks having a blast. Bought some carbotech xp 10s for track work.

Installed clear side markers and white LEDS:
https://i.imgur.com/ceYNd03.jpg


Next up was Valenti 4th brakelight

https://i.imgur.com/sQwXO7O.jpg

Some snow donuts while home in Portland during the holidays:
https://i.imgur.com/9ZFeebw.jpg


Next up was STI front lip and JDM day time running lights:
https://i.imgur.com/z2vkkTD.jpg

Finally added some HT auto side skirts and this how the car currently looks:
https://i.imgur.com/06KcouM.jpg


All mods installed so far as been done by me in my garage. I am proud of that since I have no mechanic experience at all. Not the hardest mods but I've been learning a lot and getting way more comfortable turning a wrench.

Plans for spring mods
I have Some EUL headers coming and going to get those tuned at Drift office which is a local shop in Auburn WA. I also have the Rise and Shine spoiler coming as well. I have been thinking about getting STI lowering springs and ft86 rear diffuser(non-aggressive). Unsure. Waiting for Jackson racing to release their 2017 version of the radiator/oil cooler. Also been thinking about wrapping my door handles black I think it would look awesome. Plus a nice small project to learn wrapping.

Oh I also did STI push start button.

Looking good. I'm jealous of the clear bra. Is it bumper / hood only?

Its on the door edge + behind door handle and trunk. Its the Subaru kit and its pretty nice. If I were to buy my own I would have a detail shop wrap it. I think they would do a better job.

Oh! Ok. I was thinking you had it on the front bumper and hood. It’s so clean and shiny, and doesn’t look like there’s any paint chips.

Sorry its on the bumper and half hood plus the rest of places I mentioned.

Got my Drambeenie spoiler installed at lunch time today. Pretty easy install. I love the look. Just one photo to share for now. I went with the matte black to match the spoiler and the yellow and black theme.

https://i.imgur.com/OhpGcfe.jpg

Another shot of the new spoiler. I was out in south downtown seattle doing some drifting/donuts in the snow. :)
https://i.imgur.com/2uX9LNy.jpg

picture of the 4th brake light with the lights OFF please!

Here ya go. I tried to go with something that looked like the stock my17 tails. So I went mostly red with a little clear just like the taillights.
https://i.imgur.com/w4n16BN.jpg

Thanks for this. I used to have the smoked ones, but with the stock tail light's chrome, I think your's looks much better.
I'm convinced now :)

Sneak peek! All coated up.

https://i.imgur.com/mkmBqYm.jpg

Updates!!!!

Got my 2017 Nameless axleback exhaust. I went with 3inch + mufflers. Installed it last night. Sounds great and tips look good.

Unpacked:
https://i.imgur.com/8N4BZTx.jpg

Out with the old:
https://i.imgur.com/YD57Zgv.jpg

In with the new!
https://i.imgur.com/1M5hMua.jpg


sound clip:
[ame="https://www.youtube.com/watch?v=htR9IfsdkH4"]Nameless 2017 axleback - YouTube[/ame]

Picked up go pro as you can see from the video. Excited to use it to capture some track footage.

I picked up a Radium dual catch can from amazon for $360! Started the install but I've run into a screw where the thread has been stripped. So that's holding up the install. :(

evil screw:
https://i.imgur.com/5mFAT8h.jpg


3D printed my own fuse box cover using shapeway.com
https://i.imgur.com/HPSrolA.jpg

Mods in flight. (in mail)

1. FT-86 rear diffuser non-agro + diff cover
2. GReddy oil cooler 2017 version
3. Gruppe-s Coated EUL + Drift office tune
4. Shorai 5 pound battery
5. Oil/tran/diff fluid change

This will put the car at stage 1 for me. Which I will leave it in all summer and enjoy the tracks out in the PNW. Throw the modding money towards running costs.(brakes, fluids, track days, etc). Next winter I will decide if I want to go deeper into the car and install a supercharger or just leave it as is and run it at the track for the next few years.