CTSV Brake Swap Kit
 

Recently bought this and have decided to go in a different direction.
All the parts are brand new!
Cadillac Brembos
DBA Slotted STI Rotors
CTSV Brake Swap Kit
Brembo Caliper Pins
Everything is included EXCEPT for the brake pads.

600 Shipped

Located in SF, California

Wish I would've held out for this... paid nearly the same price for a used kit a month ago :/ killer deal!!

Sent from my 2PQ93 using Tapatalk

Wheel size/offset requisite for these?

Not sure, I never got a chance to install them. I remember seeing a thread about offsets somewhere on the forum though.

Minimum of +35 offset on a 17X9, you also have to consider J Factor, the curvature of the spokes from hub to rim. Enkei Rpf1s won't work in that size but Wrappers TC105Ns will. 18s generally give you more room to work with.

Sent from my 2PQ93 using Tapatalk

What about work meister 18x9.5 29 offsets in a disk

this is a good deal! fingers crossed it makes it to next week!

Like stated above it all depends on the specific wheel I run a 17x9 42, a 17x8 45, and a set of 18x8.5 35 all of which fit with good clearance. only issue i've run into is on the 17x8 I had to place the wheel weights in a different location for clearance just for caliper edge.

For those asking questions, there is no set minimum offset or wheel width for these, or diameter for that matter, at least not within reason. It has everything to do with the specific design of the wheel, and how much clearance the spokes have from the hub. This is not codified in wheel offset but some wheels like Works have different disc types that can give you a pretty good idea.


Your best bet other than finding someone online who has already fit the exact model/size/offset that you want is doing what I did when I put SRT/benz brembos on the Z. Work with the wheel retailer. Sometimes they will send you a template that you can put on the car that will tell you if their wheel will clear. In my case, I just ordered one wheel after discussing some measurements with them over the phone and they guaranteed I could return it free of charge if it didn't clear. Once I was able to successfully test fit the wheel, I ordered the rest of the set.


OP, good luck with sale. I don't yet have my car back from the body shop so I don't know if it has been fixed well enough for me to keep it yet or not. If I did, I probably would have already bought these.

Are these still for sale? If so, shipping to Hawaii?

SOLD