Help w/ Coilover Install
 

Just ordered Tein Street Basis coilovers that I'm planning to install this weekend (assuming they arrive by then). Anyone with some coilover experience want to help a less-experienced brotha out?

Pics of my 4x4 to encourage you...

@TheDrkNite?

I can help

I would if you ain't so damn far lol

Thanks man. According to FT86SF and UPS they won't be here until Tuesday so I'll probably wait until next weekend. I'll keep you posted.

Sounds good to me. Are you set for tools? Do you have an air compressor by chance?

No air compressor. I only have a 1/2 drive torque wrench (may be fixing that this weekend) so I can't torque anything down smaller than 17mm at the moment. I have jack stands and a jack, but I'm thinking I should go to Home Depot and get some 2x8s for the front jack point and to roll up on before jacking it up so I don't get the jack stuck after lowering haha.


Sent from my iPhone using Tapatalk

Yea i found that out the hard way when i put my coilovers on. Couldnt get the jack out from under it hah. I have lots of tools, being a mechanic lol. I'll throw together a bag of stuff. Installing coilovers is actually alot easier than you think. I will say, unless you buy at least adjustable rear lower control arms, if you go low enough your factory alignment adjustment points wont be able to account for the camber.

I won't be going very low so I'm hoping not to need LCAs or end links. Probably around 1.5" drop. I don't plan on running anything more than natural camber from the drop.


Sent from my iPhone using Tapatalk

Remember to rent a spring compressor, the street basis reuse the oem top hats unless you bought extras or adjustable aftermarket replacements.

Coils arrived today. Hoping to install on Sunday. @Zepperly you available?

Sunday might be difficult. Head to Kent for more tech schooling. Is saturday possible?

Help w/ Coilover Install
 

Bit the bullet and did it alone (mostly). Took longer than I care to admit, but it turned out great.


Sent from my iPhone using Tapatalk

alignment?? I would def get that dialed in by a pro. id do it but your in the wrong vancouver LOL and i wont be in the right one for a couple weeks.