Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Bolt-Ons (https://www.ft86club.com/forums/forumdisplay.php?f=60)
-   -   FS (MD): Green Air Filter (https://www.ft86club.com/forums/showthread.php?t=121569)

s203.22b 08-27-2017 08:37 PM
Mods please close.

MillerTime13 08-27-2017 11:52 PM
I'm interested in the axleback. Do you know if the tips are the new design? If not, do they show any signs of cracking?

StraightOuttaCanadaEh 08-28-2017 12:44 AM
Hey that wouldn't be the ultra quiet over front pipe, would it?

BCB75 08-28-2017 07:53 PM
What part of MD are you in? I'm close to the state line and interested in the header.

s203.22b 08-28-2017 08:20 PM
Quote:
Originally Posted by StraightOuttaCanadaEh (Post 2969212)
Hey that wouldn't be the ultra quiet over front pipe, would it?
No, that pipe would have the resonator in it.

s203.22b 08-28-2017 08:20 PM
Quote:
Originally Posted by BCB75 (Post 2969591)
What part of MD are you in? I'm close to the state line and interested in the header.
White Hall, basically halfway between Baltimore and York

s203.22b 09-04-2017 12:13 PM
bump

Firecruiser 09-06-2017 11:46 AM
Do you know if that front pipe will clear the auto transmission?

Fez96 09-06-2017 05:41 PM
PM'ed

s203.22b 09-06-2017 06:14 PM
Quote:
Originally Posted by Firecruiser (Post 2973782)
Do you know if that front pipe will clear the auto transmission?
Yes. I contacted JDL and they confirm that it will fit automatic equipped cars.

Firecruiser 09-07-2017 07:48 AM
Quote:
Originally Posted by s203.22b (Post 2974052)
Yes. I contacted JDL and they confirm that it will fit automatic equipped cars.
Header and front pipe are both 2.5" correct? I see you had the nameless axleback was there significant drone since the fp doesn't have a resonator? I currently just have the nameless axleback and am debating on if i should get a resonated and catted fp or just catted.

s203.22b 09-07-2017 09:26 AM
Quote:
Originally Posted by Firecruiser (Post 2974347)
Header and front pipe are both 2.5" correct? I see you had the nameless axleback was there significant drone since the fp doesn't have a resonator? I currently just have the nameless axleback and am debating on if i should get a resonated and catted fp or just catted.
Both are 2.5". With the nameless axleback, I didn't remember much drone at cruising speeds/RPMS. Keep in mind I still was using the stock midpipe, which has a large resonator. I thought the setup with catless header was a little raspy, especially when accelerating hard in the 4-5k RPM range.

s203.22b 09-14-2017 10:51 PM
header is sold

s203.22b 09-24-2017 10:54 AM
bump


All times are GMT -4. The time now is 10:35 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.