![]() |
HELP!!! Was given a free GSP turbo...
2 Attachment(s)
Ok so i was given a full turbo kit and everything needed to install it on my 2013 FRS should i bother with install or get a different turbo?
I put this in a new thread because I didn't find anything out there similar to my current situation... |
How did you get a free turbo kit?
|
No no no, don't install it. re-gift it to me
|
Cause I'm cute ;)
Just kidding a friend of a friend sold his FRS and gave it to me. |
Lol It's the only thing left to upgrade on my car :) Sorry no re-gifting.
|
Any more pictures of "everything needed to install"? Not sure I would trust the turbo, what does the manifold look like?
|
I'd get a parts list and figure out what you don't have. I can tell you, you are going to need a tune, OFT or Ecutek, if the pic you posted are all the parts you are definitely missing parts.
After the parts list, figure out if you can do the install or a find a shop. Good luck. |
Considering a Google search for "GSP turbo kit" yields nothing, you either have 1) some unknown brand/kit, or 2) it's a different turbo kit.
May help to post the rest of the kit up. |
More to come...
I will take pictures of all the other stuff. GSP is Godspeed if i'm not mistaken.
|
Are there more components than pictured? A turbo kit should consist of;
-Turbo (Compressor and Turbine) -Manifold -Wastegate (doesn't appear to have an internal WG in the pic) -Blow off valve -Charge piping -Charge piping that has a MAF sensor housing -Intercooler -Shit load of couplers and clamps |
Quote:
http://www.godspeedperformance.com/2...catalog-parts/ No turbo kits listed. |
11 Attachment(s)
Parts
|
More pics
4 Attachment(s)
Pics
|
The turbo is whats referred to as an "ebay" turbo.... I rebuilt a blown ebay turbo many years back with a real center section and ran it for 40K miles with no issue. Would not do it again, probably got lucky. Ran an oil restrictor and kept an eye on shaft play.
You could replace the turbo with a more established brand, but IMO still need oft/ecutek... I wouldn't trust the unichip for a turbo application. Figure up to a few grand to get it done "right" This could be a fun project or a nightmare experience depending on many factors |
| All times are GMT -4. The time now is 05:49 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.