Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   Inivida N1 + Tomei UEL vs HKS hi power + UEL tomei (https://www.ft86club.com/forums/showthread.php?t=119755)

BlackNBlue 06-23-2017 04:37 PM

Inivida N1 + Tomei UEL vs HKS hi power + UEL tomei
 
So I'm looking at either the invidia and hks hi power exhausts, and I'm wondering will either sound too raspy with the tomei uel headers?

I enjoy both the sound of the invidia and hks, so I just need some feedback from people who have ran either setup with the tomeis.

Also the hks is a little more pricey, is it made of finer materials?

Thefear13 06-23-2017 04:48 PM

Im running Tomei UEL with the Hi-power... I love the combo but there is some rasp around 3k-4k.

mav1178 06-23-2017 04:55 PM

Anytime you get rid of the primary cat, how much "rasp" you will have will be greatly determined by what you run in your front pipe. The answer could be "no there's no rasp" to "yes your car will sound horrible".

Quote:

Originally Posted by BlackNBlue (Post 2934197)
Also the hks is a little more pricey, is it made of finer materials?

Invidia is made in Taiwan (or China), usually sold to US in USD and price is stable/low(er).

HKS is either made in Japan or at their Thailand facility, usually sold to US in JPY and price fluctuates with the exchange rate, and this is greatly affected by US geopolitics and what goes on in Congress/White House.

-alex

mav1178 06-23-2017 05:02 PM

Ignore the popping noise..

Single exit exhaust with everything else stock:
[ame="https://www.youtube.com/watch?v=6PnJP_kwGwU"]Blitz Nur-Spec R exhaust Scion FRS Subaru BRZ sound clip - YouTube[/ame]


This is what a single exit exhaust sounds like with the header:
[ame="https://www.youtube.com/watch?v=CLF_ywZuKr4"]Blitz Nur-Spec R exhaust w/ Tomei UEL header Scion FRS Subaru BRZ sound clip - YouTube[/ame]

BlackNBlue 06-26-2017 01:16 PM

Quote:

Originally Posted by mav1178 (Post 2934209)
Anytime you get rid of the primary cat, how much "rasp" you will have will be greatly determined by what you run in your front pipe. The answer could be "no there's no rasp" to "yes your car will sound horrible".



Invidia is made in Taiwan (or China), usually sold to US in USD and price is stable/low(er).

HKS is either made in Japan or at their Thailand facility, usually sold to US in JPY and price fluctuates with the exchange rate, and this is greatly affected by US geopolitics and what goes on in Congress/White House.

-alex

Thanks for the answer. So in the future a resonated front pipe would be my best bet to keep raspiness at a low level?

mav1178 06-26-2017 02:54 PM

Quote:

Originally Posted by BlackNBlue (Post 2935550)
Thanks for the answer. So in the future a resonated front pipe would be my best bet to keep raspiness at a low level?

"Effective" resonator would be more accurate. Either the resonators are large w/ baffles (OEM, cheaply made, etc) or they are of a large enough volume to reduce noise (and not amplify it).

Many exhaust components are often designed with no other consideration taken for mods elsewhere in the exhaust system. End users think "let's just get a quiet exhaust and straight pipe everything else" to mask the sound..

Pardon the pun, but there's just too much noise in what works well and what doesn't, and people keep spewing out the same wrong info.

One can never answer an exhaust question without knowing what else is on the car.


All times are GMT -4. The time now is 03:35 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.