Valenti 4th Brake Light Wiring
 

I just installed my Valenti brake light and it functions as a reverse light and brake light, but how do I get it to work as a running light when the tail lights are on?

I've looked at a bunch of install videos and all of them have different colored wires than the ones I have. I'm no expert on wiring so I just want to make sure I'm doing this correctly.

I've got a red wire from the Valenti harness tapped into the red wire on my tail light harness, and then the middle blue wire from the Valenti harness tapped into the teal wire on the tail light harness.

Thanks in advance!https://uploads.tapatalk-cdn.com/201...b26f60cf89.jpg

Sent from my ONE E1005 using Tapatalk

Have you tried that? I just installed mine few days ago and mine were reverse (red to blue, blue to red) only because I modded it for separate brake light.

I didn't pop mine open to redo any of the internal wiring, but will give that a shot later today, thank you!

Sent from my ONE E1005 using Tapatalk

You sir, are a gentleman and a scholar. That took care of the issue. Thank you.

Sent from my ONE E1005 using Tapatalk